User's Manual

14
♦ Message: To send a SMS;
♦ Sound record: To record active phone conversation;
♦ Mute: To mute or unmute the active call;
♦ DTMF: To set it On or Off.
4.10 Making a conference call(Network depenent)
Your phone supports multi-party calls of up to five members.
When there is a call waiting while you are already on the phone, you
can carry out the following operations to establish the multi-party call:
1. Press the Pick Up Key to answer the second call. The first call will
be put on hold automatically.
2. Select Conference from Option. The two calls will be combined and
a conference call is established.
During the multi-party call, you can answer a new incoming call or add
a new member to the call by dialing the new member (the ongoing
multi-party call will be put on hold automatically).
Once the call is established, select New call from Option to add the
new member to the multi-party call (you can add up to five members).
If you wish to separate one member from the call, you can select Split
during the multi-party call. To disconnect a member from the call,
select End single.
4.11 Switching calls(Network depenent)
When you have one active call and one call on hold, you can press
Left softkey Option, and then select Swap to switch between the 2
calls.
4.12 Calling handsfree
During a call, press Right softkey H-free.
Note: When the headset is plugged into the phone, you cannot
activate handsfree mode.
4.13 Answering a call
Press the Pick Up Key to answer a call.
4.14 Rejecting a call