User's Manual

- 11 -
Continuous standby time 130 Hours
Continuous call time 4 Hours
Travel Charger
Input AC 220V- AC 220V-50H
Z
, 400mA
Output DC 5.2V 450mA
2.2 SIM card
You must first insert an effective SIM card before using your handset. Your SIM
card is the key for you enter into the digital GSM network.
All the relevant information with the establishment of network linking and your
initialization of call records are recorded in the planar metal region of the SIM card, together
with the names, telephone numbers and SMS stored and received in Phonebook of your SIM
card. SIM card can be taken out of your handset, and used by any arbitrary GSM phone (a
new handset automatically reads SIM card).
To prevent the information in the card from losing and being damaged, it should
avoid touching the metal planar region, and keep the SIM card away from the electric and
magnetic places. Once the SIM card is damaged, you will not be able to enter the GSM
network.
The mobile supports install two SIM cards at same time, the two cards are in stand
by status at the same time.
* Warning: The handset must be switched off before SIM card is removed. It is
absolutely forbidden to insert or remove the SIM card when the external power supply is
connected, otherwise the SIM card may be damaged.
2.2.1 Insert and remove SIM card
¾ SIM card generally is inserted into a card bag and it must be carefully taken out
before installing it.
¾ Close the SIM card and remove the battery and other external power source.
¾ Such as below Fig.insert the SIM card into SIM card slot.
¾ When you need to remove the SIM card, please turn off the phone, take the battery
SIM card