User's Manual

7
2.1.4 Using T-Flash Car
At the right-bottom side, there is T-Flash Card slot. You can insert T-Flash card here.
Insert T-Flash card
 Slide down the fixture
 Insert card into the slot.
 Slide up the fixture.
Remove T Flash card
 Slide down the fixtur
 Get card out.
2.2 Batteries
Batteries have been charged to 50% full. It can be used after unpack. The first three times batteries must be totally discharged before charging. It will help to
prolong the batteries lifespan and working quality.
2.2.1 Changing a battery
Please follow the steps to remove the battery:
1) Push the back cover backward
2) lift the battery up to remove it
Please follow the steps to install a battery:
1) Place the top part of the battery to connect with grooves on the phone.
2) Push the battery downward till it clicks into place.
2.2.2 Charging a battery
Plug the charger into the socket.
Connect the adapter into the right of the phone.
 Battery charging indicator sign will flash; if mobile phone is switch off during charging, the indicator sign will show on the screen. If the battery is too
weak, the charging indicator sign will not show immediately after the charger plugs in.
 When charging indicator sign shows the battery is full and stop flashing, charging is finished. If charge when switch off, the screen shows charging
finished. The charging will last for a few hours. It is normal that the battery, mobile phone and charger’s temperature rise. Disconnect the mobile phone,