Installation Sheet

ManualsBrandsBeyerle ManualsHardwareProject 82-11/16 Inch Long Glass Barn Door Fitting Set

Installation instructions

Sliding door ﬁttings Project

for glass doors ( 5/16" - 1/2" thickness )

Complete-sets

Set Plano

Artikel-No.

inch

Each

inch

max. inch

inch

max. inch

(H=E-F+1")

USU97-1800EF 70 7/8" 20 1/4" 4 29 1/2" – 35 7/16" 98 7/16" 1/4"–3/8"

2 3/8"

99 1/8"

USU97-2100EF 82 11/16" 24 1/8" 4 35 13/16" – 39 3/8" 98 7/16" 1/4"–3/8" 2 3/8" 99 1/8"

USU97-2300EF 90 9/16" 20 1/16" 5 39 3/4" – 44 1/16" 98 7/16" 1/4"–3/8" 2 3/8" 99 1/8"

USU97-2540EF 100" 22 7/16" 5 44 1/2" – 49 3/16"

98 7/16"

1/4"–3/8" 2 3/8" 99 1/8"

Comply with all general safety

regulations when installing the

sliding door ﬁttings!

Installation to be completed by

qualiﬁed licensed contractor.

Be sure to tighten all screw

connections one week after starting

to use the sliding door ﬁttings!

Never use scouring agents to clean

the sliding door ﬁttings; rather use

commercially available stainless-

steel cleaners!

Beyerle US L.L.C., ABP-Byerle it´s subsidiaries and agents are not

responsible or liable for damage or injury to any persons or property

due to improper installation of it´s products.

All liabilities reside solely with the installer.

Beyerle US L.L.C.

5126 South Royal Atlanta Drive, Tucker, GA 30084

Phone (770) 349-6324, Fax (770) 934-3384, www.beyerle-us.com

Right to make technical changes reserved - Dimensions in inches - Version 03.2016

Attention

Screw on

Loosen/Tighten

Install

At right angle

Drill

Dowels

Adjust Set

Level

Perpendicular

Measure Mark

Visual inspection

Special-tool

2 people required

Measure

Clarify questions

See Instructions

Secure

Set Project

Art. No.

USU97-1800EF

USU97-2100EF

USU97-2300EF

USU97-2540EF

1 2 2 4 1 1

1 2 2 5 1 1

4 5

Set /Each

Set sliding door ﬁttings Project

Guide rail

Door stoppers

Wall ﬁxtures

Special tool

Bottom guide

(without screws and dowels,

at construction site)

(without screws and dowels, at construction site)

* not included in scope of delivery.

5/16"-18UNC

Trolley complete

SW 5

1 3/8"

Bottom guide

glass doors 5/16" - 1/2"

tempered safety glass

max. 220 lbs

(100 kg)

Warning!

Proper header or mounting

beam must be installed the full

length of the sliding door rail

to provide adequale support

for sliding door system weight

of door!

5 1/8"

65_30_00.0182_USU97_MONT_US

max. 320 lbs

(145 kg)

Summary of content (2 pages)

PAGE 1
Set sliding door fittings Project 2 Guide rail Installation instructions Sliding door fittings Project Attention Screw on 3 Door stoppers 4 Trolley complete for glass doors ( 5/16" - 1/2" thickness ) Screw on 5 1/8" Screw on 5 B B 5 1/8" Loosen/Tighten Wall fixtures 5/16"-18UNC B 1 3/8" * * Install At right angle (without screws and dowels, at construction site) * not included in scope of delivery.
PAGE 2
Tempered safety glass 5/16"-1/2" Installation to be completed by lbs contractor Fig. 3-12 2 max. 30 mm 1-1/2“ 215" B 5113/80" B max. 320 lbs Fig. 4, 5, 6 = 7 Fig. 3 Fig. 2 Fig. 1 5/16“-18UNC Fig. 4 Fig. 5 Fig. 6 B G 1-1 /2“ * E 11 5/16"-18UNC M8 Fig. 8 Fig. 7 Fig. 10 Fig. 9 Fig. 11 Fig. 12 1 1 2 2 3 Fig. 14-23 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig.