Installation Instructions

Unite AP4 – Access Point
8
Disposal
This symbol on the product, in the instructions or on the packaging means that
your electrical and electronic equipment should be disposed at the end of its
life separately from your household waste. There are separate collection
systems for recycling in the EU. For more information, please contact the local
authority or your retailer where you purchased the product.
Simplified EU declaration of conformity
beyerdynamic hereby declares that the wireless transmission device complies with the EU
Directive 2014/53/EU (RED). The complete text of the EU declaration of conformity is
available online at the following address: http://www.beyerdynamic.com/cod
Trademark
The Dante® word mark and logos are regiered trademarks of Audinate Pty. Ltd and all
use of these trademarks by beyerdynamic is licensed. Other trademarks and trade names
are the propey of the respective owners.
3. Application
The Unite AP4 access point is a multifunctional device with which you can implement
dierent applications. The device is integrated into an exiing network via an Ethernet
cable. Depending on the configuration via the separate Unite Manager Soware
(operating inructions at www.beyerdynamic.com), the device works as a transmitter,
receiver or transceiver.
For each device there are a maximum of 4 DECT channels available. As the Unite AP4 can
be cascaded, a maximum of 32 channels can be implemented with 8 devices.
2. Supplied accessories
1 x Unite AP4
1 x Inallation inructions
1 x Power supply with power cable,
depending on the country variant
1 x Thread adapter 1/2" – 3/8"
2 x Phoenix® plug-in terminal block, 2-row,
6-pin, contact spacing 3.5 mm
4 x Cover plates for mounting panel
4 x M5x10 screws
4 x M5 nut
Ventilation
• Do not inse objects into the ventilation and other openings. You could damage the
device and/or injure yourself.