Installation Instructions
Unite AP4 – Access Point
12
5. Connect the cables to the appropriate
connections.
6. Put the device onto the mounting
panel until the latches on the right and
le hand side audibly click into place.
Refer also to the inallation
inructions on the mounting panel.
Attention: Please make sure that the
device is firmly mounted.
3. Mount the cover plates to the
mounting panel according to the
cable routing.
4. Mount the mounting panel to the wall
or ceiling by using the three “keyhole
openings” with appropriate screws.
C
able routing
d
ownwards
C
able routing
b
ackwards