Installation Instructions

Unite AP4 – Access Point
11
english
6.1 Mounting to a wall/ceiling
Caution:
• Before mounting the Unite AP4 to the wall/ceiling, make sure that there are no electrical,
or gas lines or water pipes behind the planned drilling locations. If necessary, check this
with a line detector or ask an expe.
• It is a significant hazard when electrical or gas lines or water pipes are damaged
during drilling.
Attention:
• For wall mounting, use appropriate wall plugs and screws.
Example: For a wooden wall use a universal screw, 4.5 x 30mm, pan head,
e.g. WIROX®-0201010450303
1. Remove the cover plates from the
mounting panel by pressing the large
latch.
2. Route all required connecting cables
through the openings of the mounting
panel.