User's Manual

1.7 ZAS 800 Antenna Splitter

1.7.1 Controls and Indicators

(1) On/Off switch and power on LED. When the antenna splitter is switched on, the red

LED will illuminate.

(2) RF outputs to connect the receivers

(3) DC-connection to connect the DC power supply unit (12 V)

(4) Antenna sockets A/B. The antenna sockets provide a DC supply for antenna amplifiers.

(DC-Out: 8 V / 170 mA)

(5) Mounting brackets for 19" rack mounting

1.7.2 Installation

1. Mount the ZAS 800 antenna splitter and the receivers into a 19" rack by using the

mounting brackets.

2. Connect the supplied antennae to the antenna sockets A/B (4). You can also use optional

remote antennae. For mounting the antennae on the front use the supplied FB-30

mounting bracket.

3. Connect the NE 800 receivers to the ZAS 800 antenna splitter with the supplied cables.

First receiver

Second receiver

Third receiver

Fourth receiver

Opus900_BA_DEF_neu:Opus900_BA_DEF 26.09.2006 14:47 Uhr Seite 50