User's Manual

english
45
1.4.2 How to read the AF- and RF-level
The AF- or RF- level is shown in the LC-display.
1.4.3 Group, Channel
• Turn the menu control to select “G/CH”. The currently selected group and channel are
displayed.
• To change the setting, press the menu control. The group number will start flashing. Turn
the menu control to select the desired group. In order to confirm the selected group press
the menu control.
• At the same time the channel number will start flashing. Turn the menu control to select
the desired channel. In order to confirm the selected channel press the menu control.
• Press the Scan button to select a channel automatically. Press the Scan button once again
and the receiver will adjust an interference-free channel automatically. Press the menu
control to confirm the selected channel.
1.4.4 Frequency
• Turn the menu control to select “FREQ”. The currently selected frequency is displayed.
• To change the setting press the menu control. The first three digits (MHz) will start
flashing. Turn the menu control to select the desired value. The first three digits of the
frequency (MHz) can be selected in steps of 1 MHz. In order to confirm press the menu
control.
• At the same time the last three digits (kHz) will start flashing. Turn the menu control to
select the desired value. The last three digits (kHz) can be selected in steps of 25 kHz.
• In order to confirm press the menu control.
7
7
Opus900_BA_DEF_neu:Opus900_BA_DEF 26.09.2006 14:47 Uhr Seite 45