User Guide
Quick Start Guide TG 1000 – Handheld Transmitter
12
3. Digital TG 1000 UHF Handheld Transmitter
Thread to attach a microphone
head
Cover of battery compartment
Antenna
Infrared interface for synchronisation
Battery compartment
OLED display
On-off button
How to Insert Batteries
• Unscrew the cover of the battery compartment anti-clockwise.
• Slide the cover of the battery compartment downwards.
• Insert two alkaline batteries, AA 1.5 V or rechargeable NiMH batteries according to the symbols in the
battery compartment .
• Slide the cover of the battery compartment upwards again and tighten it clockwise.
• The current battery status is shown in the display of the transmitter and receiver . Make sure that
before the synchronisation the appropriate battery type has been selected in the channel menu.
How to Operate the Transmitter
• Turn on the handheld transmitter by holding the on-off button pressed, until the standard display
is shown in the display .
• The display shows the battery status and the name, which has been entered in the first line of the
receiver.
• In the second line, depending on the setting, you will see the channel and frequency group or the
frequency. By pressing the on-off button briefly several times you can display further information
in the second line.
Further information are: RF power, battery, microphone head and status of encryption and power
lock.
• When you hold the on-off button pressed while turning on, you can display the region code and
version number.
• Make sure that transmitter and receiver operate on the same frequency.
• To turn off the transmitter hold the on-off button pressed until the message “Off” is displayed.