User Manual

TG D71c english
T
hank you for selecting the TG D71c boundary microphone from
b
eyerdynamic.
Please take some time to read carefully through this information
before using the product.
Application
The TG D71c boundary microphone is primarily used for miking
bass drums, cajons, grand pianos and other low frequency
instruments. The compact design and the half-cardioid polar pattern
ensure easy positioning of the microphone. The non-slip rubber
bottom makes sure that the microphone cannot shift by itself.
Due to its high impulse fidelity, a low attack time and a maximum
sound pressure level of 148 dB, the TG D71c is suitable for miking
percussion instruments.
Connection
The TG D71c is fitted with a 3-pin XLR connector and an integrated
pre-amp. It can be powered by any phantom power source supplying
11 to 52 V. As soon as phantom power is available, the red status
LED will illuminate to indicate the operating state of the micro-
phone.
Microphone Placement
In order to achieve the best sound for a certain application, it is
possibly necessary to experiment with the microphone placement.
Due to the half-cardioid polar pattern the sound can be changed by
different angled positions of the microphone.
At the bottom of the microphone there are two mounting holes for
a permanent installation.
Bass Drum / Cajon
Put the microphone into the bass drum or cajon. In order to achieve
the desired sound, try out different positionings.
Grand Piano
Put the microphone on a suitable place inside the body for instance
the casting frame. In order to achieve the desired sound, try out
different positionings.
Maintenance
Use a soft cloth moistened with water to clean the surface. Make
sure not to allow any liquid to enter the microphone grille and
never use any solvent cleansers.
Service
Servicing must be carried out by qualified service personnel only.
Dismantling the microphone yourself will invalidate the guarantee.
Version
Model Description . . . . . . . . . . . . . . . . . . . . . Order #
TG D71c Condenser boundary microphone,
half-cardioid, black, with 3-pin
male XLR connector, integrated
pre-amp, for 11 - 52 V phantom power . . 708.992
Optional Accessories
BMC 05 FM Standard microphone cable
XLR-XLR, length 5 m . . . . . . . . . . . . . . 434.787
BMC 10 FM Standard microphone cable
XLR-XLR, length 10 m . . . . . . . . . . . . . 434.795