User's Manual

Stegos – RS Receiver

2.2 How to connect the antennae

Connect the antennae to the antenna sockets .

Please note that for diversity operation both antennae have to be

connected. A weighting circuit silently makes sure that the better

antenna signal is received.

2.3 Where to place the receiver

• Place the Stegos RS receiver in the same room where the

transmission takes place. Make sure that the receiver is placed on

the same table height as the Stegos TB boundary microphone.

• Avoid shadowing effect of the Stegos RS antennae, especially by

metallic surfaces.

• A free line of sight between the Stegos RS receiver and the

Stegos TB microphone is ideal. Big obstacles in between can

possibly affect the radio transmission. In such specific installations

the use of remote antennae can possibly achieve an improvement

of the RF situation.

2.4 Connection

• Connect the Stegos RS receiver to your video conference system.

There are three different connections:

3-pin Phoenix terminal strip 

Mini jack (3.5 mm) 

3-pin XLR 

• Connect the power cable to the mains connection  and to the

power socket.

• If you want to control or monitor the system via PC connect the

USB connection  to a PC.

 







 