User's Manual

Stegos – Software
15
4.4 Main menu
System Control
• Here you can set the output volume of the individual channels or the master.
• The microphone which has been turned on first is always allocated to channel 1.
• If you would like to lock some channels, select the “ON” button which is changed into an “OFF” button.
• If the “Global Mute” function is selected, a loudspeaker symbol is displayed under the “Master”
control. If the microphone is muted a crossed-out loudspeaker is displayed.
Microphone Battery Status
• The remaining battery power status of the individual microphones is displayed in per cent.
Connectivity
• An existing connectivity to a PC is displayed by a green bar.
• If the bar is grey, there is no connectivity. Turn on the receiver or select the appropriate Com port
under “Connectivity Settings” in the “Settings” menu. Select the “System Connect” button.
Microphone Global Settings
• Here you can activate the “Global Mute” function. The function is activated when an orange bar is
displayed below the “Global Mute” button.
“Global Mute” means that when one microphone is muted via the push-button , the other Stegos
TB boundary microphones in the room are also muted.
• With the “Power Off” button you can turn off the turned on Stegos TB boundary microphones.