User's Manual

Stegos – Software



Front view Stegos RS

Rear view Stegos RS



3.4 Mains operated

• The Stegos TB boundary microphone can also be powered via the supplied mains charger adapter.

• Connect the mains charger adapter to the DC socket . The LED  will illuminate briefly for once,

afterwards the LED  will permanently illuminate green.

• The Stegos TB boundary microphone is also charged while the mains charger adapter is connected.

4. Stegos software

With the Stegos software you can configure and monitor many parameters for the Stegos TB boundary

microphone and the Stegos RS receiver.

4.1 System requirements

• PC Pentium III 800 MHz or compatible

• Operating system: Windows

2000 or XP

• Memory: 256 MB RAM at least

• HDD: > 256 MB free space

• Screen resolution: 1024 x 768 or higher

• Graphics card memory: 16 MB

• 1 free USB port or

• 1 free COM port (RS 232)

4.2 Installation

• Connect the Stegos RS receiver  and the PC to the mains.

• Connect the USB port  or the RS 232 interface  of the Stegos RS receiver to the appropriate port

of your PC.

• Turn on the PC.

• Insert the CD-ROM with the Stegos Software into the CD-ROM drive, select “Setup.exe” and install

the software into the requested directory on the hard drive.

• Follow the instructions of the installation program.