User Manual

Quinta – Control Unit

2.9.2 Room Combining

The “Room Combining” function is used when you want to operate

or combine several Quinta systems in different rooms (A, B, C, D).

All microphone units and control units have been set to “A” at the

factory. Refer to picture “Factory setting of control units and micro-

phone units”. When you want to operate several systems in different

rooms at the same time, you have to re-conﬁgure the systems;

otherwise interference will occur. You can conﬁgure the systems for

a maximum of four rooms.

When using the “Room Combining” function for the ﬁrst time, please

proceed as described in the following:

• Place the Quinta CU control units and the Quinta MU microphone

units in the rooms A, B, C, D.

Room A

• As the control unit and the microphone units are conﬁgured to

“A” there are no changes necessary for the control unit and

microphone units in room A.

Room B to D

• The control unit and microphone units in the rooms B, C, D must

be configured. The configuration of the control unit and the

microphone units in room B is described in the following.

• Switch on the microphone units in room B only.

• Conﬁgure the microphone units in room B. Press the volume

control  approx. 3 seconds until the Quinta CU control unit

displays the main menu.

• Turn the volume control  to the right or left until “Room

Combining” is displayed.

• Press the volume control  to enter the submenu.

• Turn the volume control  until “Mic. Unit Conﬁguration” is

displayed.

• Press the volume control  to enter the submenu “MU

Conﬁguration”. For the microphone units in room B turn the

volume control  until “(B)” is displayed and press the volume

control to select “(B)” (it is ticked).

• In order to transmit the conﬁguration for room B to the micro-

phone units in room B, turn the volume control  until

“(Send2MU)” is displayed and press the volume control . Below

“(Send2MU)” the note “done” is displayed to show that the

conﬁguration has been transmitted to all microphone units in room

B having a radio link to the control unit.

Factory setting of control units and microphone units

Conﬁguration of control units and microphone units in four

different rooms