User Manual

Quinta – Microphone Units
13
3.7 Maintenance of the Microphone Units
• For cleaning the Quinta MU microphone units when they are slightly dirty (finger prints, dust, jam or juice) use a soft, damp cloth, sponge
or brush and mild liquid cleaning agent (e.g. washing-up liquid). Do not use any solvent containing cleaners.
• Make sure not to allow any water to enter the microphone capsule or housing.
• Clean the charging contacts with spirit or isopropyl alcohol from time to time. While cleaning avoid contact with the painted surface.
• Clean the pop shield with clear, warm water. Make sure that it is completely dry before you put it on the microphone again.
4. Programmable Functions of the Microphone Units with the Quinta Conference Software
The functions of the microphone units described in the following are only available, when they have been programmed with the Quinta
Conference software before. Please refer to the “Quinta Conference Software” manual.
4.1 Security Code
By using the Quinta Conference software you can enter an alphanumerical code for the Quinta MU microphone units and the Quinta CU
control unit within one system. This will increase the safety against unauthorised listening. Microphone units, which do not have this code are
not recognised by the control unit and will be deactivated.
3.6.4 Voice Activation Mode
• If the microphone units operate in the Voice Activation mode,
the microphone units are switched on via voice control. That is
the microphone unit is switched on as soon as someone speaks
into the microphone. In this case it is not necessary to press the
microphone button.
Important:
The threshold and the hold time can be configured with
the “Quinta Conference” software for all microphone
units.