User's Manual

ManualsBrandsBeyerdynamic ManualsAudio EquipmentWireless Microphone Unit

MCW-D 50 – Setting up

english

5.2 Function button of the MCW-D 523 / MCW-D 533 Chairman Microphone Unit

Depending on the configuration the following functions are possible with the

function button or : mute, clear or priority. The function button can be

configured via the control unit with the MCW-D 50 Conference software.

1. Normal

All delegate microphone units will be cleared and the microphone of the

chairman unit will be switched on. The delegates can switch on their micro-

phones again, when the chairman switches off his microphone.

2. Mute

All delegate microphone units which were activated before, will be muted

when the chairman is speaking and will be reactivated when the chairman

switches off his microphone.

3. Clear

All delegate microphone units are cleared and can be switched on

afterwards.

4. How to mute Aux-In ports

First push mutes the port, the next one enables it, third one mutes again etc.

If the chairman presses the priority button, the audio signal at the Aux Input

of the MCW-D 50 control unit will be muted. The LED or of the

chairman unit will start flashing red (slowly). When the chairman turns on his

microphone, the LED or will flash green (slowly). If the chairman turns

off priority the LED or will illuminate green permanently, if the micro-

phone is still on.

5. How to mute Aux-In ports & clear all active delegate unit

By pressing the priorty button a second time, AUX-In muting will be released.

By pressing the priority button a third time, the Aux-In ports will be muted

and all active delegate units will be cleared again, etc.

If the chairman presses the priority button, the audio signal at the Aux Input

of the MCW-D 50 control unit will be muted and all delegate units will be

cleared. The LED or of the chairman unit will start flashing red (slowly).

When the chairman turns on his microphone, the LED or will flash

green (slowly). If the chairman turns off priority the LED or will

illuminate green permanently, if the microphone is still on.

6. How to mute Aux-Out ports

First push mutes the port, the next one enables it, third one mutes again etc.

If the chairman presses priority, the audio signal at the Aux Output of the

control unit will be muted. The LED or of the chairman unit will start

flashing red (slowly). When the chairman turns on his microphone, the LED

or will flash green (slowly). If the chairman turns off priority the LED or

will illuminate green permanently, if the microphone is still on.

7. “COM Message” Function

A command is sent via the RS 232 serial interface from the MCW-D 50 control

unit and a programmed function is carried out via a media control system for

instance (e.g. light control).

8. Custom

Two different commands according to the duration of the push

< 1 second = command “Short press string” is transmitted

> 1 second = command “Long press string” is transmitted

These commands can be set individually with the MCW-D 50 Conference

Software.

MCW-D 523 Chairman microphone unit

MCW-D 533 Chairman microphone unit