Manualshelf

User's Manual

ManualsBrandsBeyerdynamic ManualsAudio EquipmentWireless Microphone Unit
41424344454647484950
MCW-D 50 – Setting up
43
english
4.4.1 Normal Operating Mode
4.4 Operating Modes
• The different operating modes such as Normal, Push-To-Talk or Voice Activation are adjusted with the MCW-D 50 Conference Software.
The standard operating mode is Normal. Please refer also to the appropriate MCW-D 50 Conference Software manual.
• Press the microphone button or to switch on the gooseneck
microphone.
• MCW-D 521 / 523: Red ring of the gooseneck microphone is
illuminated and the LED is illuminated green: The microphone is
ready for speaking.
MCW-D 531 / 533: Red LED strips on both sides are illuminated
and the LED is illuminated green: The microphone is ready for
speaking.
• Using the MCW-D 50-3 control unit 3 participants (e.g. 2 delegates and
1 chairman) can speak simultaneously. Using the MCW-D 50-9 up to 9
participants (e.g. 8 delegates and 1 chairman) can speak simul taneously.
Important:
• If the number of open microphones is exceeded, a
microphone can only be switched on manually when
another microphone unit has been switched off.
MCW-D 521 delegate unit MCW-D 523 chairman unit
8
7
7
8
8
7
MCW-D 531 delegate unit
MCW-D 533 chairman unit
20 2119
12
21
19
20 2119
4.4.2 FiFo Mode
• If the microphone units operate in the FiFo mode (first in - first out), the microphone unit that was switched on first, will be switched off
when another microphone unit is switched on and the number of open microphones (NOM) will be exceeded.
4.4.3 Push-To-Talk Mode
• If the microphone units operate in the Push-To-Talk mode (PTT) the microphone button must be pressed as long as someone speaks into
the microphone.
4.4.4 Voice Activation Mode
• If the microphone units operate in the Voice Activation mode, the microphone units are switched on via voice control. That is the micro-
phone unit is switched on as soon as someone speaks into the microphone. In this case it is not necessary to press the microphone
button.
Important:
• The threshold and the hold time can be configured with the MCW-D 50 Conference software for all microphone units.