User Manual

english
Byron BTA – In-ear headset
7
Charging
Make sure that your headset is fully charged before you use it.
The LED glows “red” during charging and will turn “blue” when fully
charged.
5
. Operating instructions
When turning the headset on/off or selecting the pairing mode, you
will hear a voice prompt.
Turn on the in-ear headset
Press the MFB button until you hear “Power on” and the blue LED
glows.
Turn off the in-ear headset
When you press the MFB button for a longer time (approx. 5 seconds),
the purple LED will glow and the headset is turned off after you hear
“Power off”.