Technical information

49The product range may vary in different regions.
Fingerprint Codoor
FP5000/FP4000
Fingerprint Codoor, a complete reader unit suitable for fitting to a single door, in-
corporates an electronic fingerprint reader locking device and a power unit in the
same housing.
Fingerprint Codoor offers the use of up to 32 different fingerprint templates and up to
four 4-digit codes. These can be used in parallel with fingerprint reading.
When Fingerprint Codoor is fitted; the outside door handle is disengaged and may be
pressed down without opening the door. To open the door a finger has to be placed on
the reader (or a code is entered). The handle on the inside of the door is not affected
by Fingerprint Codoor, and works normally for people leaving the premises.
•
FP5000 is suitable for lock cases with a distance of in between 105 mm and 116 mm
between the centre of the door handle and the centre of the lock cylinder.
• FP4000 is suitable for lock cases with a distance of 72 mm between the centre of the
door handle and the centre of the lock cylinder.
Product Article number
FP5000 25-800
FP4000 25-840
Technical Data
FP5000 and FP4000 uses lithium batteries.
Housing:
Stainless steel.
Environment:
Indoors, dry.
Temperature:
0 to +50 °C
Voltage:
9 V DC. Two batteries, 9V type 6LR61 (Not included).
Dimensions:
FP5000: 64 (W) x 245 (H) x 59 (D) mm.
FP4000: 70 (W) x 255 (H) x 54 (D) mm.
Sensor type:
Capacitive three-dimensional (requires that the finger is “alive”).
Operational time:
Approx. 16 000 openings (lithium batteries) or one year.
ACCESS PRODUCTS
FP4000FP5000
Contents >>