Technical information

43The product range may vary in different regions.
Control unit DC800
Door controller for one door
Programmable via integrated keypad or from a PC with the Entro Lite SW, but it can
also work as a door controller in a larger Entro system.
Includes functions like calendar clock, event buffering, door monitoring, anti-passback,
bank lobby function.
Very easy to upgrade to a multi-door solution by using the Entro Lite software together
with the USB-RIF/2 interface converter.
The DC800 is also a good alternative when a split mounted code lock is required
because it includes a calendar clock (no timers needed). Just install a M43 keypad
outside and/or inside the door.
Article Number: 31-620
Technical Data
Housing:
Wallmounted hosing with lock.
Colour:
White
Environment:
Indoor
Temperature:
-35 to +50 °C. 0 to 90% relative humidity.
Voltage:
10 to 40 V DC , 8–28 VAC.
Current:
200 mA (24V DC). Reader exklusive.
Dimensions:
250 (W) x 128 (H) x 54 (D) mm.
Door Capacity:
1
Code capacity:
10
Card capacity:
1000
Time Schedules:
10 (using up to eight time zones).
Time Zones:
80
Event log:
1000
Inputs:
Door contact for indicating closed/open door.
Exit button request with delay.
Outputs:
Voltage-free change over contact (lock relay), max. 2A, 30 VDC.
Voltage-free change over contact (extra relay) max. 2A, 30 VDC.
Keypad M65
Connects with four-wire to a DC800 or Telecode Controller. One for each door where
only code functions are needed. For flush mounting – use BB3 flush mounting unit.
The design, cast metal with stainless steel keys and security lock, allows both in- and
outdoor use.
Article Number: 41-524
Technical data
Housing:
Cast metal with stainless steel keys and security lock.
Environment:
Indoor or outdoor use (IP54 design). In very exposed locations, use
SH2 or SH1 rain cover.
Temperature:
-35 to +50 °C
Voltage:
12 to 24 V DC, Powered from controller.
Current:
50 mA
Dimensions:
80 (W) x 140 (H) x 40 (D) mm
Inputs:
Tamperswitch for internal alarm.
ACCESS PRODUCTS
Split Codelocks
Contents >>