Technical information

The product range may vary in different regions.34
Bewator offers the broadest range of card readers, keypads, and cards on the market with the ability
to satisfy most needs and environments. They are robust and resistant and are suitable for all
environments, either through flush or single-surface mounting.
BC18 – Magstripe Reader
Magstripe Card-only reader for use with Bewator Entro or Bewator Entro Lite.
Article Number: 21-147
Technical Data
Connect to multibox – if both indoor and outdoor readers are to be used.
Interfaces:
Connects to Entro door controller (Clock/data) or to Bewacard BC640.
Housing:
Cast metal with integrated 3 metre cable.
Environment:
Indoor or outdoor use (with heating unit VS18). In very exposed
locations, use SH1 protective cover.
Temperature:
-10 to +55 °C. (-20 heating unit VS18 installed).
Voltage:
5 V DC
Current:
40 mA.
Dimensions:
29 (W) x 124 (H) x 28 (D) mm
BC43 – Magstripe reader with keypad
BC43 is a Card+PIN reader for Bewator Entro or Bewator Entro Lite. Two units
can be installed for indoor/outdoor use. The Keypad is equipped with background
illumination and for flush mounting use the BB4 flush mounting unit.
Article Number: 21-543
Technical data
Housing:
Zinc casting lacquered metallic paint finish with stainless steel keys
and security lock.
Environment:
Indoor or outdoor use.
IP Rating:
54
Temperature:
-35 to +50 °C
Voltage:
12 to 24 V DC. Powered from controller unit.
Current:
50 mA
Dimensions:
110 (W) x 160 (H) x 47 (D) mm
Inputs:
Tamper switch internal/external (normally closed).
Magnetic Stripe Readers & Keypads
BEWATOR ENTRO LITE
Contents >>