Technical information

21The product range may vary in different regions.
Smartcard Readers
SC500 – Smart Card Reader
Smart Card Reader. The SC500 is a smart card reader with small dimensions. The
reader has a tight plastic enclosure, which makes the installation and location simple
in various environments. The SC500 reads data from Mifare® cards, and can be used
with either a Granta or an Entro system. The default configuration reads the chip serial
number from Mifare® cards and provides a Wiegand output.
Article Number: 50-249
Technical Data
The carrier frequency is 13.56 Mhz.
Interfaces:
Wiegand, Clock&Data.
Housing:
Plastic
Colour:
White
Environment:
Indoor or outdoor use.
IP Rating:
67
Temperature:
-40 to +55 °C
Voltage:
+10 to +30 VDC
Current:
130 (max) mA
Dimensions:
44 (W) x 110 (H) x 24 (D) mm
Reading distance:
70 mm, supports Mifare® standard transponders and multi-
application transponders.
Connection:
Supplied with a prepared fixed 3 m cable mounting.
Indicators:
Tri-colour LED
SC500P – Smart Card and PIN Reader
Smart Card Reader with PINpad. The SC500P is a smart card reader with small
dimensions. It has an integrated keypad for entering a PIN-code. The reader has a
tight plastic enclosure, which makes the installation and location simple in various
environments. The SC500P reads data from Mifare® cards, and can be used with
either a Granta or an Entro system. The default configuration reads the chip serial
number from Mifare® cards and provides a clock & data output.
Article Number: 50-250
Technical Data
The carrier frequency is 13.56 Mhz.
Interfaces:
Wiegand, Clock&Data.
Housing:
Plastic
Colour:
White
Environment:
Indoor or outdoor use.
IP Rating:
67
Temperature:
-40 to +55 °C.
Voltage:
+10 to +30 VDC
Current:
200 (max) mA
Dimensions:
44 (W) x 110 (H) x 24 (D) mm.
Reading distance:
70 mm, supports Mifare® standard transponders and multi-
application transponders.
Connection:
Supplied with a prepared fixed 3 m cable mounting.
Indicators:
Tri-colour LED.
BEWATOR ENTRO
Contents >>