Access Control Product Catalogue
Contents >> INTRODUCTION & PROFILE Introduction Welcome to the 2006 edition of Bewator’s Access Control Product Catalogue. We hope you find all the necessary information required to buy and install a wide variety of innovative access control solutions. This guide should act as a useful tool for sourcing any of your access control requirements and prove an effective point of reference. If however, you need any further assistance please contact us by phone or visit our website.
Contents >> CONTENTS Why Bewator Access Control? 4 Technical Services 5 Bewator Entro 7 Bewator Entro Lite 25 Compact Cardreaders 37 Codelocks 39 Demo case 44 Codoor 47 Cards & Tags 51 Door Entry Phone Systems 55 Accessories 63 Glossary 68 Conditions of Sale 70
Contents >> Why Bewator Access Control? Why choose Bewator Access Control? • Quality, innovative products and systems • Patented Cotag® Hands-Free technology • Simple to install products • Established for over 25 years serving markets worldwide • Excellent service and support capabilities • Comprehensive training facilities • Strong partnerships with Distributors and System Integrators • Products and systems installed in major businesses and organisations around the world • Comprehensive range of Access Co
Contents >> Technical Services Bewator aims to be a product supplier with a difference. Standing out from its competitors, the company has an After Sales Services Division offering expert post-sales technical support and troubleshooting to assist Installers and Dealers during installation and configuration of all Bewator branded products. If your engineers need that bit of extra technical information then help is at hand. Call our technical support teams on +46 8 629 03 00.
Contents >> Bewator Entro 5 Imagine the unimaginable Conceive a multi-scale IP access control system capable of handling anything from 1 to 40,000 cardholders. Think future-proofed components, mirrored databases and Ethernet connection in an IP environment. Envisage a multi-functional, multi-site system that has all the features you expect, plus many you didn’t. Imagine this same highly technical system being consummately easy to install and just as easy for users. Now you understand Entro.
Contents >> Bewator Entro- The award winning Bewator Entro system is suitable for commercial and industrial premises, institutions such as hospitals, or indeed any establishment requiring an effective Access Security Solution. Simplicity is one of Entro’s most important qualities.
System Introduction Entro Version 5 The user-friendly, networkable access control system An access control system is a sophisticated yet convenient way to protect premises or buildings by restricting access to non-authorised persons without the need for a key. The Bewator Entro system is suitable for commercial and industrial premises, institutions such as hospitals, or indeed any establishment requiring an effective access security solution.
Contents >> BEWATOR ENTRO Bewator Entro Software Bewator Entro Software v.5 Can communicate via directly connected (COM), – or on local and global network (LAN/WAN) via TCP/IP, – or via modem based systems. Includes sophisticated event control- and search functions with graphical icons for door monitoring in addition to common tasks like card administration.
Contents >> BEWATOR ENTRO Segment Controller This is the vital part of the Bewator Entro access control system, which holds the processor and where the complete database including cardholder names is stored. This means that the PC does not have to be connected when the system has been installed, which makes the system less vulnerable and simplifies service and expansion of the system. SR34i The SR34i is the controller used in Entro version 5.
Contents >> BEWATOR ENTRO Door Controllers & Compact Readers The door centrals DC22 & DC 12 is used together with the SR34i to offer the best possible functionality in Entro version 5. Both DC22 and DC12 are designed with the installation process in mind, keeping it simple and easy to maintain. Each door central comes with a display to indicate the system status. DC22 Controls one door.
Contents >> BEWATOR ENTRO Door Controllers & Compact Readers DC01 Door central Unit for one door (without reader). Used for general control like timing functions or door monitoring. Article Number: 31-603 Technical Data Interfaces: RS485 connection to SR34i segment controller. Housing: White plastic box. Colour: Light Grey Environment: Indoor use only. Temperature: -35 to 50 °C. Voltage: 8 to 40 V DC or 8 to 30V AC Current: 100 mA. Dimensions: 120 (W) x 80 (H) x 40 (D) mm.
Contents >> BEWATOR ENTRO IO Controllers IOR6 IOR6 is a general relay central for Entro. With 4 inputs and 6 outputs it is intended for use in lift control appplications – or machine control/door control in reservation applications – or just as pure timer functions. A maximum number of 32 units of IOR6 can be used for lift control – otherwise only restricted by addressing technique in Entro (maximum 512). Article Number: 31-606 Technical data Interfaces: RS485 connection to SR34i segment controller.
Contents >> BEWATOR ENTRO Proximity Readers There is a wide range of readers for the Entro system, which gives you the opportunity to choose the reader best suited for your needs. Proximity readers for instance, can read cards from 5 to 30 cm. The “close” proximity reader is the most common choice, with benefits such as simplicity, lower risk of manual interference and less wear-and-tear on the cards when compared to magnetic stripe cards readers.
Contents >> BEWATOR ENTRO Proximity Readers SP500 – Switch Plate Proximity Reader Compact, proximity reader for Bewator Entro or Bewator Entro Lite. Mounted into most single gang back-boxes. Read range of up to 30 cm, and is available with EM or Cotag reading technology. Product Article Number SP500 Cotag 21-424 SP500EM 21-422 Technical data Housing: ABS Base with housing fully encapsulated electronics, Clip on ABS Front Cover. Colour: White Environment: Indoor or outdoor use.
Contents >> BEWATOR ENTRO Proximity Readers BC43 – Prox & PIN Reader Proximity Reader with built-in keypad for Bewator Entro or Bewator Entro Lite. Built-in keypad offers the possibility of combined access control with both a card and a PIN for higher security. The metal casing used in Bewator’s robust designs protects the reader against tampering and makes it extremely vandal-resistant.
Contents >> BEWATOR ENTRO Proximity Readers – Codoor PD30EM Prox Codoor PD40EM Prox Codoor PD30EM and PD40EM – Prox Codoor Prox Codoor is a system Prox reader for Bewator Entro with an integrated electromechanical lock. It is an ”all-in-one-reader” and is an efficient way to protect any indoor security needs. Since the reader is mounted straight on to a standard Euro lock case, you do not have to make any unnecessary cuts in the door, besides for the cables for power and communication.
Contents >> BEWATOR ENTRO Hands-free Readers HF500 – Hands-Free Reader Hands-Free Reader for Bewator Entro or Bewator Entro Lite. Indoor use, reads through concrete, wood, glass etc but not metal. Article Number: 21-400 Technical Data Housing: White UV-resistent ABS-plastic. Environment: Indoor use only . Temperature: 0 to 50 °C. Voltage: 10 to 35 V DC Current: 400 mA Dimensions: 220 (W) x 265 (H) x 29.3 (D) mm Reading distance: Appr. 1m with IB928 (active card). Appr.
Contents >> BEWATOR ENTRO Hands-Free Loop Technology Readers BC5270 – Loop Reader Integrated Loop Reader offering both Loop Coupler and Reader electronics inside one convenient enclosure. Up to 4 metre reading zone with Active Technology Tags. Uses simple wire loop antenna. Compatible with all Cotag Technology Active and Passive cards & tags. Reads through all non-metallic materials. Easy to install complete Loop Reader. Flexible, easy configuration, compatible with most OEM access control systems.
Contents >> BEWATOR ENTRO Magnetic Stripe Readers & Keypads Bewator offers the broadest range of card readers, keypads, and cards on the market with the ability to satisfy most needs and environments. They are robust, durable and are suitable for all environments, either through flush or single-surface mounting. BC18 – Magstripe Reader Magstripe Card-only reader for use with Bewator Entro or Bewator Entro Lite.
Contents >> BEWATOR ENTRO Smartcard Readers SC500 – Smart Card Reader Smart Card Reader. The SC500 is a smart card reader with small dimensions. The reader has a tight plastic enclosure, which makes the installation and location simple in various environments. The SC500 reads data from Mifare® cards, and can be used with either a Granta or an Entro system. The default configuration reads the chip serial number from Mifare® cards and provides a Wiegand output.
Contents >> BEWATOR ENTRO Reservation Terminal One of the reasons for Entro being so popular is because the system is so versatile and includes functions such as reservation of and access to specified areas. The InfoPoint is an ideal product to make it easy for users to do reservations in a Bewator Entro reservation system. It can work in parallel with standard web browser functionality. You can mount the InfoPoint nearby the object, which can allow for the users to view and edit their reservations.
Contents >> BEWATOR ENTRO Cards, Keyring tags & Accessories Cards & Tags – Cotag IB-928 50-527 Active Clamshell encoded card. IB-911 50-528 Active encoded keyring tag. IB-970 15-118 Active encoded vehicle tag (attaches to underside of vehicle). IB-968 15-119 Passive encoded clamshell card. IB-961 15-120 Passive encoded keyring tag. IB-958M 50-529 Passive encoded ISO laminated card with magstripe, suitable for Photo ID.
Contents >> Bewator Entro Lite Imagine a cost effective access control system for small businesses that only have a few doors to control but still require a high level of security. Envisage a system that can be customized for any needs that your business may have, and easily be expanded as your business grows. Bewator Entro Lite can easily be upgraded to Bewator Entro – one of the best selling access control systems on the market. Of course the same hardware is upgradeable to Bewator Entro.
Contents >> Bewator Entro Lite The access system Bewator Entro Lite is a cost efficient solution for those who only have a few doors to control but who still want to feel safe with a high level of security. Entro Lite can be installed with one door to start with and can then be expanded with more doors when needed. The possibility of adding more doors as you go along makes the system flexible and cost efficient.
Contents >> BEWATOR ENTRO LITE System Introduction Entro Lite Entro Lite is an access control system that has been developed with focus on the end user. Programming and administration can be done simple via a keypad in standalone mode or via the Window based Entro Lite software. Adding new cards, setting access levels or blocking lost cards is quickly and easily achieved.
Contents >> BEWATOR ENTRO LITE Door controller DC800 Door controller for one door Programmable via integrated keypad or from a PC with the Entro Lite SW, but it can also work as a door controller in a larger Entro system. Includes functions like calendar clock, event buffering, door monitoring, anti-passback, bank lobby function. Very easy to upgrade to a multi-door solution by using the Entro Lite software together with the USB-RIF/2 interface converter.
Contents >> BEWATOR ENTRO LITE Entro Lite Entro Lite SW PC Software + USB-RIF/2 converter Software for control of up to eight DC800 door controllers. Nine languages included as standard. Includes also an interface unit USB-RIF/2 for converting the RS485 communication bus to USB (in PC). See the product USB-RIF/2 for more information about the converter. The software is of the type “one-window” with both events and programming menus displayed at the same time.
Contents >> BEWATOR ENTRO LITE Entro Lite – Readers There is a wide range of readers for the Entro system, which gives you the opportunity to choose the best reader for your needs. Proximity readers for instance, can read cards from 5 to 30 cm. The “close” proximity reader is the most common choice, with benefits such as simplicity, lower risk of unwanted reads. Hands-free readers, when used in conjunction with Bewator’s Cotag active technology can read cards from a distance of up to 1 metre.
Contents >> BEWATOR ENTRO LITE Proximity Readers SP500 – Switch Plate Proximity Reader Compact, proximity reader for Bewator Entro or Bewator Entro Lite. Mounted into most single gang back-boxes. Read range of up to 30 cm, and is available with EM or Cotag reading technology. Product Article Number SP500 Cotag 21-424 SP500EM 21-422 Technical data Housing: ABS Base with housing fully encapsulated electronics, Clip on ABS Front Cover. Colour: White Environment: Indoor or outdoor use.
Contents >> BEWATOR ENTRO LITE Proximity Readers BC43 – Prox & PIN Reader Proximity Reader with built-in keypad for Bewator Entro or Bewator Entro Lite. Built-in keypad offers the possibility of combined access control with both a card and a PIN for higher security. The metal casing used in Bewator’s robust designs protects the reader against tampering and makes it extremely vandal-resistant.
Contents >> BEWATOR ENTRO LITE Hands-free Readers HF500 – Hands-Free Reader Hands-Free Reader for Bewator Entro or Bewator Entro Lite. Indoor use, reads through concrete, wood, glass etc but not metal. Article Number: 21-400 Technical Data Housing: White UV-resistent ABS-plastic. Environment: Indoor use only. Temperature: 0 to 50 °C. Voltage: 10 to 35 V DC Current: 400 mA. Dimensions: 220 (W) x 265 (H) x 29.3 (D) mm Reading distance: Appr. 1m with IB928 (active card). Appr.
Contents >> BEWATOR ENTRO LITE Hands-Free Loop Technology Readers BC5270 – Loop Reader Integrated Loop Reader offering both Loop Coupler and Reader electronics inside one convenient enclosure. Up to 4 metre reading zone with Active Technology Tags. Uses simple wire loop antenna. Compatible with all Cotag Technology Active and Passive cards & tags. Reads through all non-metallic materials. Easy to install complete Loop Reader. Flexable, easy configuration, compatible with most OEM access control systems.
Contents >> BEWATOR ENTRO LITE Magnetic Stripe Readers & Keypads Bewator offers the broadest range of card readers, keypads, and cards on the market with the ability to satisfy most needs and environments. They are robust and resistant and are suitable for all environments, either through flush or single-surface mounting. BC18 – Magstripe Reader Magstripe Card-only reader for use with Bewator Entro or Bewator Entro Lite.
Contents >> BEWATOR ENTRO LITE Smartcard Readers SC500 – Smart Card Reader Smart Card Reader. The SC500 is a smart card reader with small dimensions. The reader has a tight plastic enclosure, which makes the installation and location simple in various environments. The SC500 reads data from Mifare® cards, and can be used with either a Granta or an Entro system. The default configuration reads the chip serial number from Mifare® cards and provides a Wiegand output.
Contents >> BEWATOR ENTRO LITE Cards, Keyring tags & Accessories Cards & Tags – Cotag IB-928 50-527 Active Clamshell encoded card. IB-911 50-528 Active encoded keyring tag. IB-970 15-118 Active encoded vehicle tag (attaches to underside of vehicle). IB-968 15-119 Passive encoded clamshell card. IB-961 15-120 Passive encoded keyring tag. IB-958M 50-529 Passive encoded ISO laminated card with magstripe, suitable for Photo ID.
Contents >> Compact Cardreaders Bewator Access Control Systems provide a secure method of protecting doors, whilst causing as little restriction as possible on freedom of movement. As part of this ‘free-flowing’ security, Bewator has produced a range of Compact Cardreaders. These are available in two different technologies, Magnetic Stripe or Proximity.
Contents >> ACCESS PRODUCTS Compact Cardreaders Product: BC615 BC615Prox BC615EM General Description: Compact, magnetic card reader for one door. Programmable from the keypad. Can also be used in Bewator Entro. Built-in time clock for easy change of security levels. Access registration and printing. Indoor or outdoor use. Keypad background illumination. Blocked after three wrong codes. For flush mounting – use BB4 flush mounting unit. Compact proximity reader for one door.
Contents >> Codelocks Bewator produces the best selling range of Codelocks in the world. Bewator Codelocks are the natural choice when seeking a simple and secure method of locking doors without having to resort to the use of keys. Using a Codelock allows those with authority to enter by use of a four digit code, all others are effectively locked out.
Contents >> ACCESS PRODUCTS Compact Codelocks All-in-one for fast installation. Within the Compact Codelocks all the electronics are the same in each unit, therefore for simple installation you only need the PSU and then connect to a suitable electrical lock. Product: K42 K44 Duo K12 General Description: One lock, two codes. K42 has the highest selling rate of codelocks in the world. A simple and compact codelock with modern design for outdoor montage.
Contents >> ACCESS PRODUCTS Schematics ~ 230 VOLTS TA/DC POWER SUPPLY ELECTRIC RELEASE Typical standard installation for: K-42 & K-44 & K12. EXIT BUTTON The product range may vary in different regions.
Contents >> ACCESS PRODUCTS Split Codelocks If there are several doors to be controlled, or higher security is requested, you can install a split mount codelock control unit together with one or more keypads. Since all doors are controlled from the same place, it is very easy and convenient to change all codes at the same time. Our control unit allows for a multi-door solution. You mount the control unit indoors and then connect up to six keypads outdoors.
Contents >> ACCESS PRODUCTS Split Codelocks Control unit DC800 Door controller for one door Programmable via integrated keypad or from a PC with the Entro Lite SW, but it can also work as a door controller in a larger Entro system. Includes functions like calendar clock, event buffering, door monitoring, anti-passback, bank lobby function. Very easy to upgrade to a multi-door solution by using the Entro Lite software together with the USB-RIF/2 interface converter.
Contents >> Bewator Demo Cases Demo case Entro 5 demo case The demo case is a black heavy-duty case with aluminium trim. The case features a full three door system and also includes an IOR6, which can be used for demonstrate Lift control or Alarm outputs.
Contents >> Bewator Demo Cases Demo case Codoor Demo Stand Oak wood stand with CD3500 and a mechanical lock. Product Article number CD4000 DEMO UNIT 88-405 FP4000 DEMO UNIT 88-406 PD40EM DEMO UNIT 88-407 BM3 & K44Duo Demo Case Grey heavy duty case with aluminium trim. The case features BM3 and K44 Duo. Integrated power supply. Product Article number Demo case BM3&K44Duo 97-414 InfoPoint IP-810 Demo Case Grey heavy duty case with aluminium trim.
Contents >>
Contents >> Codoor Codoor – the world’s fastest codelock! Codoor CD3500 is a battery-powered codelock you fit directly on the door inside the building. Codoor is very simple to install. Since Codoor has everything built into one unit, you do not need to run any cables or make changes to the door or frame. As your needs change, you can move the Codoor to another door without leaving any installation marks. Codoor is suitable for the majority of doors which require a locking door handle e.g.
Contents >> ACCESS PRODUCTS Codoor CD3500 CD4000 CD3500/CD4000 A battery-powered codelock you fit directly on the door inside the building. Locks the door from the outside, the correct code allows the door to open once. The programming of codes is carried out directly on the button panel. Lock can be set manually to “unlock”. Repeated keying of the wrong code blocks the unit from further attempts. The batteries used are standard alkaline or lithium cells.
Contents >> ACCESS PRODUCTS Fingerprint Codoor FP5000 FP4000 FP5000/FP4000 Fingerprint Codoor, a complete reader unit suitable for fitting to a single door, incorporates an electronic fingerprint reader locking device and a power unit in the same housing. Fingerprint Codoor offers the use of up to 32 different fingerprint templates and up to four 4-digit codes. These can be used in parallel with fingerprint reading.
Contents >> Prox Codoor A cost-effective way of securing a door
Contents >> Cards & Tags Bewator offers a range of card and tag technologies for use with Bewator access control systems and products. This range includes traditional Magnetic Stripe, Bewator’s patented Cotag® Proximity and Hands-Free and Mifare® Smart Cards. Cotag® Active and Passive Technology cards & tags may be easily mixed within the same system allowing customers to allocate the most appropriate tag technology for that cardholder’s day to day duties.
Contents >> ACCESS PRODUCTS Cards & Tags Product: IB911 IB970 IB928 IB928-Blue General Description: Active, proximity tag for Cotag. ncludes lithium battery. Factory encoded. Active, encoded vehicle tag featuring Cotag Technology. Used with Loop Technology Reader, attached to the underside of the vehicle. Active, encoded clamshell card featuring Cotag Technology. Includes lithium battery. Factory encoded. Active, encoded clamshell card featuring Cotag Technology. Includes lithium battery.
Contents >> ACCESS PRODUCTS Cards & Tags Product: IB41 IB42 IB44 IB45 General Description: EM Laminated Card with print. Passive proximity card for EM4102. Completed with Bewator print and magnetic stripe for use also in conventional readers. EM Laminated Card without print. Passive proximity card for EM4102. Completed with magnetic stripe for use also in conventional readers. Key tag with EM technology. Used for cardreaders with EM4102 reading technology.
Contents >>
Contents >> Door Entry Phone Systems It is a natural requirement for most businesses to be able to lock their entrances against external threats, but at the same time, they must have a simple and convenient way of letting in visitors or employees. The simplest and most effective way of solving this problem is to install a modern ‘entrance phone system’ Bewator’s range consists of three different solutions: Bewatel, Telecode and Bewacom.
Contents >> DOOR ENTRY PHONE SYSTEMS Three different solutions Bewatel – the traditional door entry phone Bewatel is Bewator’s entrance phone system for small businesses and domestic premises, and is available for one to four extensions. At each extension a telephone handset is fitted for answering and opening the entrance door. There are three Bewatel models in the range, some with a built-in codelock, which will allow separate control for staff and residents.
Contents >> DOOR ENTRY PHONE SYSTEMS Bewatel Door Entry phones For one call button select model BT41, four call buttons the BT44, or the BTK41 with one call button and a built-in code lock. NOTE: A matching, separate codelock can be supplied for use with model BT44 if required. Product: BT41 BT44 BTK41 General Description: Bewatel doorphone. Traditional doorphone with one key. Connects by wire to handset V801/B801. Doorphone Traditional doorphone with four keys.
Contents >> DOOR ENTRY PHONE SYSTEMS Bewatel BTVX Exchange unit for connecting up to 4 Bewatel units Used when up to four Bewatel doorphones are connected to one handset. Only actual door are opened. Article Number: 45-110 Technical Data Interfaces: 5-wire to handset. Connection to four Bewatel doorphones. Housing: White plastic housing with security lock. Environment: Indoor Temperature: -20 to +35 °C Voltage: 12 to 24 V AC/DC Current: 20 mA in standby.
Contents >> DOOR ENTRY PHONE SYSTEMS Bewacom Product: BM3 BM31 General Description: Door entry phone for PABX Is used as an analogue extension for the internal telephone system (PABX). Built-in codelock with four codes. CCTV control and switch. Door Telephone to PABX (single button) Is used as an analogue extension for the internal telephone system (PABX). One button for hotline function. CCTV control and switch.
Contents >> DOOR ENTRY PHONE SYSTEMS Telecode TC300 Door entry phone, for maximum 300 telephone numbers Doorphone central for one door and up to 300 telephone numbers. Connects to TP5 or M65 at the door. Easy to programme via integral keypad and display. Could also be remotely programmed with REMO PC-based software. Is also available for maximum 2, 4 or 6 doors, also with the capacity of up to 300 telephone numbers.
Contents >> DOOR ENTRY PHONE SYSTEMS Telecode and Accessories M65 Keypad Connects with four-wire to Telecode Controller. One for each door where only code functions are needed. For flush mounting – use BB3 flush mounting unit. Article Number: 41-524 Technical Data Interfaces: Four-wire for connection to TC5000/KC5000 central. Housing: Cast metal with stainless steel keys and security lock. Colour: Grey Environment: Indoor or outdoor use (IP54 design).
Contents >> DOOR ENTRY PHONE SYSTEMS Schematics CCTV Relay Output TA/DC Power Supply Door Release BM3 Door Entry Phone NP-FLEX Metal Nameplate 24V AC Transformer Included with Telecode Controller CCTV Relay Output Door Release Dedicated Analogue Telephone Socket 62 Telecode Controller The product range may vary in different regions.
Contents >> Accessories Bewator offer a wide range of accessories, further enhancing the performance and installation of our Access Control products and systems. Our range covers Locking Devices, Power Supplies, Exit Buttons, Break Glasses, Printers and even spare keys. In this section you should be able to find the most suitable accessory for your system, be it new or an upgrade.
Contents >> ACCESS PRODUCTS Accessories Product: BB3 BB4 BB4Prox BB5 General Description: Flush mount kit for flush mounting to give an unobtrusive and aesthetically pleasing installation of the following products: K42, K44Duo, K12, M4, M65 and RB9120. Flush mount kit for an unobtrusive and aesthetically pleasing installation of the following products: BC610, BC615, BC43, DT05 or RB9160.
Contents >> ACCESS PRODUCTS Accessories Product: LF1 E7 CR1 BA212 General Description: Alarm bypass unit Can be used together with a separate cardreader for alarm control. LF1 are then triggered by the lock voltage impulse. Monostable or Bistable function. Multi Relay General relay to be used for special applications. E.g. to achieve a voltage free connection. Includes two separate outputs. Selection of either voltage or potential free output (removable jumpers).
Contents >> ACCESS PRODUCTS Accessories Product: USB-RIF/2 REMO General Description: Interface for Enrolment Reader The USB-RIF supports the interfaces Clock & Data and Wiegand 26bit for connecting readers. Software Software for remote control of the code central unit KC5000 or doorphone central Telecode TC5000. Serial cable or modem. Different sites. Password protected. The central is the master, i.e. the information is first uploaded to the PC – modified and then downloaded.
Contents >> XX Head Take Off to New Security Heights with Bewator Bewator offers modular solutions to fit the requirements of ports and airports around the world Bewator has many years of experience solving the particular security requirements of ports and airports. Bewator provides a cost effective means of delivering total security solutions that can be tailored to the client’s individual requirements. We provide a flexible frame to increase cargo security and maximize security investments.
Contents >> Glossary Access – To enter protected areas or premises Access Control – A method of automatically controlling entry to and/or exit from protected areas or premises Access Control Database – A store on the computer or controllers of all the records required to make the access control system function as required Access Control Software – A group of programs which are run, when required, on a computer (usually a PC) which perform specific tasks associated with setting up and using the access contr
Contents >> GLOSSARY Maglock – An electro-mechanical device which uses magnets on the door and the frame to lock or unlock a door Magnetic Stripe Card – A card that contains a band of ferrous material that can be magnetically encoded Menu – A displayed list of commands or features available to the operator Mifare® – A registered trade name for Smart Card technology (see Smart Cards) Modem – A device which transmits and receives binary data across a telephone line.
Contents >> Conditions of Sale 1 General 1.1 The following are the terms and conditions (“Conditions”) of the contract (“Contract”) under which Bewator AB (the “Company”) is to supply the goods and/or services specified in the Company’s acknowledgement of order attached to these Conditions or otherwise agreed in writing by the parties (the “Equipment”) to the person placing that order (the “Reseller”). 1.2 No other terms, conditions or warranties shall apply unless agreed to in writing by the Company.
Contents >> Conditions of Sale 7.5 The Company shall be under no liability under the above warranty: 7.5.1 in respect of any defect in the Equipment arising from any drawing, design or specification supplied by the Reseller; 7.5.
Contents >> Customer Services For general product information, orders and deliverystatus, please contact us at: Phone: +46 8 629 03 00 Fax: +46 8 627 00 96 Email: order@bewator.se Technical Support For technical questions, please contact us at: Phone: +46 8 627 0300 Email: support@bewator.se Address Bewator AB P.O Box 1275 SE-171 24 Solna Sweden Visitor’s address Englundavägen 7 Solna Business Park www.bewator.
