Specifications

7
E.A.S. Electronic Article Surveillance (1 Year Warranty) (continued)
Code Trade
Certain items on this page may incur a delivery charge
TECHNICAL SALES SUPPORT Tel: [phone] Fax: [phone]
Article Tagging Systems
Meters
We recommend each installer purchases one of each of the meters listed below. If there are issues with a system not performing correctly, a
couple of fundamental questions that will be asked by our Technical Sales Support Team will always require the RFTSYSMETER meter to answer
them. If the installer does not have these meters the Technical Sales Support Team will NOT be able to help the installer. There are two types of
meters, one is for testing that the frequency of the tag is correct and the other is for checking that the system is operating at the correct
frequency. These meters are for SWEPT SYSTEMS only and will not be of any use with the PULSED single pedestal systems (XL SUPRA MONO).
Due to being single pedestal systems, the XL SUPRA MONO systems do not require any test equipment.
If the system installed is not picking up the tags, there are a number of meters available to check the frequencies. Alternatively one can use the
meters when installing the systems to check everything is operating correctly. The FREQUENCY meter for testing the tags is 210 x 80 x 21 mm
and requires 4 x AA batteries. The SYSTEM meter is 104 x 57 x 19mm and requires a PP3 battery.
928-0870 RFTFREQTEST Tag frequency meter, requires 4 x AA batteries
928-0871 RFTSYSMETER 8.2 GSF system meter, requires a PP3 battery
Accessories
928-0872 LAN120DLOOP Lanyard double loop, pack of 100
The double loop lanyard has a loop at both ends and is 20cm in length in white plastic. This is used to attach difficult shaped items to a tag.
928-0873 LAN120FLEXS Flex string, pack of 100
The Flex strings are like galvanised wire and are about 20cm in length. These are, used to attach difficult shaped items to a tag. However the
tag needs to have a hole in it so the wire can be pushed in - this refers to the Aura mini tag only.
RFI Ferrite Cable Clamps
XS NUDA and XL SUPRA systems
If upon activation an external sounder or signalling device is required, this can be achieved by using the dry contact output. To prevent any
stray RFI from the signalling device, a Ferrite cable clamp MUST BE USED.
928-0920 FERRITE-SIZE-B Ferrite cable clamp for providing a quick “Retro-fit”solution to RFI problems, pack of 4
CABLE SPECIFICATION
The cable required between the XS Nuda or XL Supra transmitter & receiver is a belden GAR9534STY cable
Cable
927-0040 GAR9534STY Belden style, 4 conductor overall screen cable, 24AWG, 100m
Pungo tags
928-0852 RFTPU825SLW Pungo tag 8.25 Mhz, white,standard lock, pack of 1000 (each tag requires a pin, sold separately in packs of 1000)
Aura tags
The Aura tags have a conical coil to aid detection and reduce the effect of ‘plane consciousness’*. The frequency can be from 1.95 to 8.25 Mhz
with the standard colour as white for standard lock tags.
Note* ‘plane consciousness’ = if the tag has a flat coil the tag performance may appear to vary at different angles in wider systems, that’s
where the conical coil comes in. The Aura tag is 62mm in diameter & 23mm in depth
The Aura mini tag is 42mm in diameter & 23mm in depth
The Aura tag offers a slightly better detection range between system pedestals, but some retailers prefer the smaller Aura mini tag for their
clothing, this still has a good detection range of up to 1.6m.
928-0854 RFTAU825SLW Aura tag 8.25 Mhz, white, standard lock, pack of 1000 (each tag requires a pin, sold separately in packs of 1000)
928-0855 RFTMA825SLW Aura mini tag 8.25 Mhz, white,standard lock, pack of 1000 (each tag requires a pin, sold separately in packs of 1000)
Ostra tags
928-0856 RFTOSD58SLW Ostra D50, white,standard lock, pack of 1000 (each tag requires a pin, sold separately in packs of 1000)
Pins
There are two types of pins available – 16mm conical plastic head with smooth or grooved shank and 19mm flat plastic head with smooth or
grooved shank. Pins do not come with the tags as they are a separate item. However a pin is required to attach the tags to garments and, when
the garment is sold, the tag is detached from the pin.
928-0857 PIN016SMCON Standard 16mm Pins, pack of 1000
928-0858 PINTED00D65 Ostra TED 16mm Pins, pack of 1000
Adhesive labels
Often known as soft tagging. These are applied to solid objects and are either plain or printed with a dummy barcode to disguise its real
function. The labels are either 4cm x 4cm or 5cm x 5cm (actual size). The larger the label the better the detection, but more retailers prefer
4 x 4 labels because of their smaller size.
928-0862 RFTLAB5X5PL Adhesive labels 8.2 Mhz, 5 x 5cm, plain, pack of 2000
928-0863 RFTLAB5X5BC Adhesive labels 8.2 Mhz, 5 x 5cm, barcoded, pack of 2000
928-0864 RFTLAB4X4PL Adhesive labels 8.2 Mhz, 4 x 4cm, plain, pack of 2000
928-0865 RFTLAB4X4BC Adhesive labels 8.2 Mhz, 4 x 4cm, barcoded, pack of 2000
Detacher & Deactivator
A magnetic detacher unit releases hard tags without damage to garments. It must be secured to a counter. The RF Deactivator is where
labels are passed over the plate at the cash desk to deactivate them.
928-0866 MRELSTDSURF Detacher, standard strength
928-0867 RFDEACDUOPC Adhesive label deactivator with dual outputs,includes a control unit (for controlling 2 pads) and a deactivator pad
928-0868 RFDEACCONBX Adhesive label deactivator control unit
928-0869 RFDEAC00PAD Extra deactivator pad for an adhesive label deactivator control unit (supplied with 900cm of cable)

NEW 927-1423 RDDEACWAND2 Deactivator wand, requires control unit

NEW 934-0001 RFLABELDESE Label Scanner/Deactivator unit
For more information about our products, please call [phone]