Specifications

E.A.S. Electronic Article Surveillance is a way of protecting a retail
stores merchandise.
What is a Tagging System?
A tagging system comprises of a transmitter, receiver and a tuned circuit (a tag). The majority
of tagging systems are presence only detection systems. When a tag is put into the field, the
field is detuned and this detuning is detected by the receiver. The receiver has many high Q
filters to reduce the risk of false alarms. The receiver has to look at more than one frequency
(sweep).
SINGLE PEDESTAL SYSTEMS (XL SUPRA MONO, 8.2 Mhz)
These systems combine a transmitter and receiver in one aerial. Lower frequencies are
used for these systems, normally below 3.25 Mhz. Generally 1.95 Mhz is used for RF (Radio
Frequency) systems but has limited capabilities ie. cannot use paper labels. The XL Supra
Mono systems operate on 8.2 Mhz allowing the use of paper labels on a single pedestal
system. (1.95 Mhz versions are available but are not compatible with paper labels).
DUAL PEDESTAL SYSTEMS (XS NUDA, XS SUPRA and XL SUPRA, 8.2 Mhz)
These systems consist of a separate transmitter and receiver, making them capable of
covering greater distances. RF Systems operate at 3.25 Mhz, 4.75 Mhz and 8.2 Mhz.
They give a high pick rate >98% when using hard tags. When using multiple transmitters,
slaving is necessary.
An RF System offers the following benefits:
 Well established technology with a significant cost saving on tags
 Large tags present a strong visual deterrent to shoplifters
 Offers entry level (single pillar) systems for smaller garment retailers
 The ability to detect paper labels as well as hard tags
Code Trade
E.A.S. Electronic Article Surveillance (1 Year Warranty)
XS NUDA
XL SUPRA
TECHNICAL SALES SUPPORT Tel: [phone] Fax: [phone]
Certain items on this page may incur a delivery charge
Article Tagging Systems
Radio frequency systems & equipment
Single Pedestal System
This advanced single pedestal 8.2 Mhz system is capable of operating either as a standalone system or in an installation of up to 18 systems.
Active and passive aerials can also be added to make it cost effective for dual aisle installations.
Specifications Detection distances either side of the aerial
XL SUPRA MONO
Aura Tag 1.2 metres (928-0854)
Width 390mm Mini Aura Tag 1.0 metre (928-0855)
Height 1550mm 5 X 5 Adhesive Label 0.9 metres (928-0862)
Depth 40mm 4 X 4 Adhesive Label 0.75 metres (928-0864)
Mains Supply 100-230V AC Note: each tag requires a pin, sold separately in packs of 1000

NEW 930-0001 XLSUPRAMONO8.25 XL SUPRA MONO 8.25 Mhz single pedestal system
XS Nuda Systems
With a size less than half that of a standard system the XS Nuda shows only minimal presence in the shop entrance. The advanced digital
electronics provide a level of performance that is unmatched for this size of system.
The system operates on 100-230V AC and the minimal centre operating frequency is 8.25 Mhz.
The transmitters and receivers can be installed at a maximum distance of 1.90 metres apart when a pungo hard tag is used. (928-0852).
The systems come with a PSU complete with a 2m lead.
927-1176 XPXSNUDA23GSFTX XS Nuda Transmitter
927-1177 XPXSNUDA23GSFRX XS Nuda Receiver including PSU
XS Supra Systems (1550 x 250 x 40mm (HxWxD)) 100-230V AC
The ultra compact XS SUPRA is equipped with Omni Directional Detection (ODD) technology. ODD provides an optimal detection performance, even
when the smallest paper labels are used. The XS SUPRA is supplied as standard with customisable Plexiglass panels and an integrated sounder with light.

NEW 927-1891 XPXSSUPRATX XS Supra 23GSF Transmitter

NEW 927-1890 XPXSSUPRARX XS Supra 23GSF Receiver including PSU
XL Supra Systems (1550 x 390 x 40mm (HxWxD)) 100-230V AC
The XL Supra is a true wide aisle system for those retailers requiring the maximum possible detection width and reliability.
Using Omni-Directional Detection (ODD) technology, paper labels can be detected as easily as hard tags on distances up to 1.6 metres.
The system operates on 100-230V AC and the operating frequency is 8.2 Mhz.
The transmitters and receivers can be installed at a maximum distance of 2.2 metres apart when a pungo hard tag is used. (928-0852)
The systems come with a PSU complete with a 2m lead.
927-1178 XPXLSUPRAGSFTX XL Supra 23GSF Transmitter
927-1179 XPXLSUPRAGSFRX XL Supra 23GSF Receiver including PSU
Detection Distances
XS Nuda Systems XS Supra Systems XL Supra Systems
Pungo Tag (928-0852) up to 1.9 metres up to 1.8 metres up to 2.2 metres
Ostra D50 Tag (928-0856) up to 1.7 metres up to 1.6 metres up to 2.0 metres
5 X 5 Adhesive Label (928-0862) up to 0.9 metres up to 1.4 metres up to 1.9 metres
4 X 4 Adhesive Label (928-0864) up to 0.75 metres up to 1.3 metres up to 1.75 metres
Note: each tag requires a pin, sold separately in packs of 1000