Specifications

The GSM EasyGate interface unit comes with a 2Amp plug top PSU, high gain aerial, CD, and RJ11 cable. PLEASE NOTE. No SIM card is supplied with
the unit. The GSM unit is SIM free, which enables the end user to select the service provider, depending on signal strength coverage.
The GSM interface requires a standard SIM card as found in mobile phones that is connected to a mobile network with sufficient credit to be able
to make calls (supplied by others). Subject to mobile service providers area coverage.
Relink systems DO NOT work with SIM cards from the 3 network
50
9135130E BASE MODULE
9135130KE BASE MODULE
SYSTEM DIAGRAM
The EntryCom door entry system comes configured to allow connectivity via either a PABX analogue extension port, telephone line, or
with the addition of a GSM EasyGate interface unit, which makes calls via the GSM network.
The base modules will only require a 12V AC/dc power supply if you require the panel to be backlit. Otherwise the panel can be powered
by the voltage coming down the respective phone line connections.
All the base modules come with a volt free contact, rated 50V @ 2Amps. There is an optional second auxiliary volt free contact available.
On the keypad version the keypad can be used as a short dial, of up to 50 numbers, or as an electronic code lock. If using separate push
keys the system can call up to 54 numbers.
With the GSM interface there is no limitation to distance, easy two wire connection. All the programming is carried out by dialling into
the system. It recognises busy lines or no answer and can if required hang up and call another number, land line or mobile (max 6
numbers).
The Camera is colour/mono switchable with infra red. The camera unit will require a regulated 12V dc, 2Amp PSU. Output of the camera
is colour composite PAL video signal. It will need to be wired in 75 ohm coax/twisted pair or UTP CAT5 or higher. Other connection
methods are using web browser over IP via a MPEG/LAN converter, or it can connect into an s-video connection.
All panels are available in Vandal resistant flush housings and in 12swg Stainless Steel with flush or Surface options.
All units are IP55 rated, with voice guided programming.
How do you put a system together?
Base Modules
• Establish the number of telephone numbers you wish to call
• Choose whether you want individual push buttons per telephone number or do you wish to use the keypad as a short dial function. the maximum number of
push buttons is 54 and the maximum number of short dial options via the keypad is 50 numbers.The keypad can also be used as a code lock.
• Work out the base module you require i.e. number of buttons (3 button 9135130E (914-1137) or 6 button 9135160E (914-1139) and if a keypad is required
(913513OKE (914-1138) or 9135160KE (914-1140)), then add extension modules as required.(9135181E (914-1145) or 9135182E (914-1146)
How do you want to Communicate?
• BT or equivalent telephone line or via an analogue extension port on a PABX (No additional communication equipment required)
• GSM Interface (if using GSM then you will require a GSM interface unit (501303GB (915-1502))
Accessories
• Add a roof module (Rain cover) (optional i.e.9135331E (915-1675))
• The Base Modules are surface mounted as standard.If you require the unit to be flush fitting add the relevant flush fixing kit.
• If you require an anti-vandal base module add the appropriate anti-vandal kit,note that the flush fitting kit comes with the anti-vandal unit.
Power Supply
• All the base modules requires a 12V dc PSU
Camera
Any base module can be fitted with a colour/mono switchable camera with infra-red.The camera will need to be cabled to either an LCD screen or by using an
MPEG/LAN converter to the Local Area Network (LAN).This will allows the camera to be given an IP address and all images can then be viewed by using an
authorised PC via a web browser.
System Build Examples
3 Way System to BT Line
1 x 935130E (914-1137)
1 x 12V dc PSU
To make the above system GSM capable add
1 x 501303GB (915-1502) and purchase a
suitable SIM card with sufficient credit to
make calls (available from others)
14 Way System to BT line
1 x 9135160E (914-1139)
1 x 9135181E (914-1145)
1 x 12V dc PSU
To make the above system GSM capable add
1 x 501303GB (915-1502) and purchase a
suitable SIM card with sufficient credit to
make calls (available from others)
Up to 50 Way System dialling via
numeric keypad to BT line
1 x 9135130KE (914-1138)
1 x 12v dc PSU
To make the above system GSM capable add
1 x 501303GB (915-1502) and purchase a
suitable SIM card with sufficient credit to
make calls (available from others)
EASYGATE
For more information about our products, please call [phone]