Specifications
127
Certain items on this page may incur a delivery charge
Code Trade
EXIT BUTTONS (continued)
Polished Brass (1 gang) exit button
Note:All exit buttons whose code begins with 3E**** are screen printed “PRESS TO EXIT”.
923-0058 3E0659-4 Vandal resistant exit button, flush mount, 25mm dia button
923-0083 3E0610-4 Surface housing for above exit button, polished brass
Disabled Buttons
923-0081 CM-25/4 CDV narrow switch DISABLED LOGO & “PUSH TO OPEN”
923-0082 CM-23 CDV Surface back box for CM-25 Series
923-0076 CM-60/4 CDV 6” round All active Stainless Steel flush disabled exit switch, with DISABLED LOGO & PUSH TO OPEN Engraved
923-0077 CM-63-BL CDV Surface back box, Stainless Steel, for CM-60 series (CM-63)
923-0146 CM-40/2 CDV 4” round All active Stainless Steel flush disabled exit switch, with DISABLED LOGO Engraved – requires CM-49
923-0147 CM-40/3 CDV 4” round All active Stainless steel flush disabled exit switch, with PUSH TO OPEN Engraved – requires CM-49
923-0148 CM-40/4 CDV 4” round All active Stainless Steel flush disabled exit switch, with DISABLED LOGO & PUSH TO OPEN Engraved – requires CM-49
923-0149 CM-49 High impact surface housing, bevelled edges to provide a robust and stylish unit
Touch/Pressure Sensitive Exit Buttons
923-0084 3E0677-1 3E Touch sensitive exit switch, 1 gang, flush mount, Stainless Steel.All applications. Requires a 12V dc supply
921-0267 TST CDV, Plastic 1 gang surface/semi flush touch sensitive exit switch,12V dc & adjustable time delay relay output
924-0012 IEC06/1N/NS ALPRO,Pressure sensitive, Narrow flush mount,anodised exit button on a S/S plate, IP68 rated
924-0014 IEC06/1N ALPRO,Pressure sensitive anodised flush exit button on a S/S plate, IP68 rated c/w 1 gang flush back box
Note:Alpro buttons are specifically designed as an input device to an access control unit, the switch activation time is 120m seconds,N/O contacts.
923-0021 3E0620-1 Surface housing for 3E & IEC exit buttons, mock Stainless Steel, NARROW style
923-0022 3E0610-1 Surface housing for 3E & IEC exit buttons,1 gang, mock Stainless Steel
Radio Kit for Exit Buttons
NEW 923-0212 OPR-KIT CDV, Radio kit,converts standard exit buttons into radio transmitters where cabling is difficult. Supplied with 1 x transmitter pre-wired in
an enclosure and 1 x receiver.The receiver will accept up to an additional 79 CDV TX26 transmitters
Microswitched Exit Touch Bars
Microswitched exit touch bar for use on exit doors where fail unlocked electric locking is used as part of an escape route. Can be used
in conjunction with an exit button or as the sole exit device on a door, suits doors up to 900mm wide with a centre rail for mounting.
This unit must be purchased in conjunction with a door loop to return the cabling to the access control device.
923-0056 9000DMS Abloy Microswitched exit touch bar for use with fail unlocked devices c/o contacts rated 5 Amp at 30V dc
927-0714 MSPB CDV Microswitch Push Bar 900mm change over switch, satin anodised aluminium, (MSPB-840)
927-1317 692-GR LockneticsTM electronic smart bar - 12/24V dc SPDT 3A @ 30V dc, no moving parts, genuine fail safe,916 x 88 x 57mm (LxWxD)
Note;The smart panic bar with no moving parts, uses infra-red beams as a means of lock
de-activation.Please note the smart panic bar can be cut down to a minimum door width of 26”.
Ingersoll Rand Security Technologies - Briton Mechanical Exit Bars (5 Year warranty)
Briton Panic Exit Bars are manufactured by IR Security & Safety and are the number 1 exit device within the UK. The Briton brand is
synonymous with quality and durability, an ideal partnership for your life safety product requirements. Exit devices must cover a
minimum of 60% of the door width for buildings where a panic situation may occur. For external access a range of compatible devices
are available upon request. Touchbars offer improved aesthetics and only project 100mm from the door. This projection makes them
suitable for narrow final escape doors which do not open past 90 degrees. Plated and coloured finishes are available upon request.
927-1318 376E-SE Push bar vertical panic bolt
927-1319 377E-SE Push bar set for Double Door applications
927-1320 378E-SE Push bar - Rim Panic Latch
EXIT SENSOR
Passive Infra-Red Detector specially designed for “request-to-exit” applications.
927-0226 DS160 Surface mount, 12V - 30V AC/dc exit sensor, 2 change over outputs 1 Amp @ 30V dc contact rating, coverage of 2.4m by 3m,
current consumption 35mA @ 12V dc, available in light grey
EXIT ALARM
The X-12D Exit Guard is designed to be a completely self contained alarm unit, ideal for locations
which need to be guarded when the normal alarm system is disarmed. Complete with the internal
tamper switch and 4 wire detection circuits the unit will operate in standby mode for up to
6 months and in alarm mode for up to 3 hours on a new battery. The Exit alarm is provided
with a standard 2 screw magnetic contact and operates on a closed loop detection basis.
A battery test button is incorporated to ensure that there is sufficient charge in the battery.
This unit is also available with suited keys.
927-1279 X-12D Elmdene battery operated exit alarm
FIREMAN SWITCHES
927-0700 3E0690-1 Firemans override drop keyswitch, flush,Satin Stainless Steel
905-0041 3E0691-1 Firemans override drop keyswitch, surface, Satin Stainless Steel
927-0701 3E0690-DK Firemans standard pattern drop key
3E FIREMANS SWITCH
CDV DISABLED
Exit Buttons