User manual

BC615 Installation and User Manual 55
Duress
This is how to activate the duress alarm output if forced to open the
door under threat (this works during the Card + PIN security level
only):
Swipe or present the card at the card reader and enter the usual PIN
code, only add 1 to the last digit in the code.
Example 1: If the PIN code is 1234, press 1235 instead.
Example 2: If the PIN code is 1239, press 1230 instead.
When a duress code is entered, the door is opened at the same time as
the alarm output is activated (an alarm is sent to a security guard or
similar). The alarm output will be activated until it is reset by entering
programming mode.