User manual

54 BC615 Installation and user manual
Daily use
Entrance
To open the door the user should do the following:
• Enter a four-digit common code (if Common code is the current
security level).
• Use a card (if Card is the current security level).
• Use a card and enter a personal code belonging to the card (if Card
+ PIN is the current security level). Should the wrong PIN-code be
entered 3 times in succession the card is automatically cancelled
and must be logged on once again.
The toggle function
If the toggle function is activated, the user can open the door in one of
the above-mentioned ways (depending on the current security level).
The door remains open until a user (need not be the same one as
opened the door) again completes a valid transaction or until another
security level starts.
Choose/change PIN code (Calculated PIN not set)
To choose/change your individual PIN (in SiPass Entro installations the
PIN code is set from the PC):
1 Press A on the card reader’s keypad.
2 Use your card at the card reader.
3 If it is the first you are choosing a PIN code for this card, enter
0000. Otherwise enter the existing code.
4 Enter the new code using four digits.
5 Enter the new code again.
You have now set the PIN for your card.