User manual

BC615 Installation and User Manual 37
Delete all holidays
This function is used to delete all programmed holidays.
1 Set the card reader to programming mode.
2 Press A55. zz
3 Press A55 one more time.
The unit automatically goes back to programming mode.
Set door release time
The door release time determines for how long the lock should remain
released following a correct transaction. The default value is 7 seconds.
This is how to change the opening time, if required:
1 Set the card reader to programming mode.
2 Press A28. zzz
3 Enter the desired door release time (between 01 and 99 seconds).
4 Press B to leave programming mode.
Set door held warning time
If the door is still open when the door release time is over, a buzzer
sounds at the door for the time set as door held warning time. The
buzzer reminds the person entering to close the door immediately as an
alarm is about to go off. This is how to change the door held warning
time, if required:
Set the card reader to programming mode.
1 Press A29. zzz
2 Enter the desired door held warning time (between 01 and 99
seconds).
3 Press B to leave programming mode.