Technical information
Bewacard 610 Technical Manual 21
Door operation on change of toggle enable
The default setting is that if the door is unlocked when a security level
changes, the door will be locked immediately. This is setting 0 of this
function.
This function can be changed so that the door remains unlocked when a
security level changes. This is setting 1 of the function.
To lock the door a valid transaction must be performed as required
during the new security level. (e.g. Card + PIN)
1 Set the card reader to programming mode.
2 Press A96. zz
3 Press 1 for setting 1.
4 Press 0 for setting 0 (this is the default setting).
5 Press B to leave programming mode.