Technical information

Bewacard 610 Technical Manual 17
Change the Door Opening time
The opening time determines for how long the lock should remain open
following a correct entrance. The default is 7 seconds. This is how to
change the opening time, if required.
1 Set the card reader to programming mode.
2 Press A28. zzz
3 Enter the desired opening time (between 01 and 99 seconds).
4 Press B to leave programming mode.
Buzzer on/off
The default is that the buzzer is activated. If you do not want the buzzer
to beep on key presses or door opening, it can be turned off. Note that
even when the buzzer is off for normal operation, it will continue to
sound during programming.
1 Set the card reader to programming mode.
2 Press A65. zz
3 Press 0.
4 Press B to leave programming mode.
To reactivate the buzzer, press 1 in step 3 instead.