Product guide

Tel: [phone] E-mail: [e-mail] www.bewator.co.uk
Smart Card Readers
General Description
Product
Specification
Dimensions (mm)
Temperature Range
Environmental
Power Supply
Power Consumption
Reading Range
Reading Range
Limitations
Model No.
SM-501KSM-501
Mifare® Contactless Smart Card Proximity
Reader with integrated keypad. SM500
series readers can be read the unique 32bit
serial number in every Mifare® card or data
from a location in the Mifare® Application
Directory (MAD). This allows easy
integration of access control with other smart
card applications.
13.56MHZ Operating Frequency.
3 separate LEDs & onboard Sounder
(internal/external control). Hardwired
cryptographic algorithm, mutual
authentication plus encrypted transmission
using session key. PIN data transmitted
along normal data lines Electronics housed
within ABS case, fitting to back mounting
plate. Push in plugs cover fixing holes
120H x 120W x 28.5D
-30 ºC to +55 ºC
IP53
10.0V to 36.0V
80mA
3cm with Mifare® Smart Card
Typical range specified assumes the card is in
its best position and orientation, and that the
Reader is not unduly affected by electrical
noise. Mounting the Reader onto a metal
surface can reduce range by up to 25%
Mifare® Contactless Smart Card
Proximity Reader. SM500 series readers
can read the unique 32 bit serial number in
every Mifare® card or data from a location
in the Mifare® Application Directory (MAD).
This allows easy integration of access
control with other smart card applications
13.56MHZ Operating Frequency.
3 separate LEDs & onboard Sounder
(internal/external control). Hardwired
cryptographic algorithm, mutual
authentication plus encrypted transmission
using session key. Electronics housed
within ABS case, fitting to back mounting
plate. Push in plugs cover fixing holes
120H x 120W x 28.5D
-30 ºC to +55 ºC
IP53
10.0V to 36.0V
80mA
3cm with Mifare® Smart Card
Typical range specified assumes the card is
in its best position and orientation, and that
the Reader is not unduly affected by
electrical noise. Mounting the Reader onto
a metal surface can reduce range by up to
25%
39