Product guide

Tel: [phone] E-mail: [e-mail] www.bewator.co.uk
Hands-Free Loop
Technology Readers
General Description
Product
Specification
Dimensions (mm)
Temperature Range
Environmental
Power Supply
Power Consumption
Reading Range
Reading Range
Limitations
Model No.
BC-5516BC-5270
Integrated Loop Reader Pack. Features
Cotag® Technology. Provides, by a buried loop
in the ground or round a door, a read range of
up to 2 meters. Use only Active cards & tags.
Internal use only.
Transmit Frequency 132kHz, Receive Frequency
66kHz. 64 data bits, read time typically 400ms,
800ms when noise rejecting AVI mode selected,
battery conservation routines. Impact-resistant
polystyrene base and clip-on top cover.
Integrated Loop Reader inside one enclosure.
TX & RX status LEDs and onboard sounder.
Configurable onboard relay.
195H x 110W x 70D
0° to +50°C
IP54
12V DC
350mA
2 metre typical with Active 928 Tag or IB-970
Vehicle tag
Typical range specified assumes the card is in its
best position and orientation, and that the
Reader is not unduly affected by electrical noise.
Mounting the Reader onto a metal surface can
reduce range by up to 25%
Loop Reader Pack. Features Cotag®
Technology. Provides, by a buried loop in the
ground or round a door, a read range of up to 2
metres. Use only allows external fitting using a
BC-270 Loop Coupler (external use) and a BC-
5311 Interface (internal use only). Suitable for
Automatic Vehicle Identification (AVI).
Use only Active cards & tags
Transmit Frequency 132kHz, Receive Frequency
66kHz. 64 data bits, read time typically 400ms.
BC-5311 - impact - resistant polystyrene base
and clip-on top cover. BC-270 - robust
polycarbonate case. Weather resistant (not
suitable for burial). Simple installation. Tunes
simple wire loops for access applications.
BC-270 - 80H x 160W x 56D
BC5311 - 195H x 110W x 70D
BC-270 -40˚C to +50˚C
BC-5311 0˚C to + 50˚C
BC-270 IP56
BC-5311 IP54
12V DC
350mA
2 metre typical with Active 928 Tag or IB-970
Vehicle tag
Typical range specified assumes the card is in its
best position and orientation, and that the
Reader is not unduly affected by electrical noise.
Mounting the Reader onto a metal surface can
reduce range by up to 25%
37