User manual

Chapter 11. The [SETTING] Menu: Event

N300 Operations User Manual

Activate Digital Output: after selecting this action, the additional options will appear:

 Digital Output1: choose the specific digital output (only one digital output is

available in this camera model).

 Continuously active while event triggered: the digital output will be only active

during the period of activity of the selected alarm event.

NOTE:

If the [Continuously active while event triggered] option and the [Periodical] or [Digital

Input] event type in the [Change] mode are selected the digital output will always stay in the

“Active” status after the first event triggering. It is done for proper operation of some devices’

types. When setting an event it is important to remember about this feature.

 Continuously active for … seconds: the digital output will be active during a

certain period of time from the moment of alarm event activation.

NOTE:

You can set the normal status of the digital output in SETTING – System – Digital I/O (see

paragraph 7.4).

“Schedule” settings group allows setting the operation mode of the chosen alarm event. It

includes the following items (Рiс. 11.26).

Рiс. 11.26

 Always: an alarm event is always active.

 Schedule: an alarm event will be active only according to the schedule (see

paragraph 11.6).

NOTE:

To save changes press the [Save] button, to cancel changes press the [Cancel] button.

11.2.1.1. Motion Detection

Motion Detection: the action is executed when motion detector triggers (Pic. 11.27).