User manual

Chapter 11. The [SETTING] Menu: Event
N300 Operations User Manual
85
The detailed description of alarm event types and their setting is given in paragraphs
11.2.1.1 – 11.2.1.9.
“Action” settings group allows adjusting actions triggered by alarm events. To select an
action check the corresponding item (Pic. 11.25).
Pic. 11.25
Send Image: selected this action you will see a table with the configured event servers.
Select a server the files should be sent to.
To configure the event server go to SETTING – Event – Event Server and press [Add] or
[Edit] button (see paragraph 11.1).
Send Notification: this function allows you to send notifications to the HTTP server when
alarm event triggers off. To use this function you need to set the HTTP server at first (see
paragraph 11.1.1.3)
№
Abbreviation
Meaning
1
MD
Motion Detection
2
AD
Audio Detection
3
TD
Tempering Detection
4
DI
Digital Input
5
PE
Periodical Event
6
RB
Reboot
7
CW
Capacity Warning
8
LD
Network Link Down
9
IP
IP-address changing