User manual

Chapter 11. The [SETTING] Menu: Event
N300 Operations User Manual
67
 Date/Time: add date and time of the file creation. The suffix includes: 4 numbers for
a year, 2 numbers for a month, 2 numbers for a date, 2 numbers for hours, 2
numbers for minutes, 2 numbers for seconds. As a result 14 numbers will be added
to the suffix.
 Sequence Number: add a sequence number to the file name. it starts from 000001
and is a number sequence with increasing of the next values for 1. You can reset
this number by pressing the [Clear] button.
NOTE:
To save changes press the [Save] button, the FTP server window will be closed. If you do not want to save
any changes press the [Cancel] button.
IMPORTANT:
Recording files to the FTP server may cause the decreasing of frame rate when low bitrate data channels
are used.
11.1.1.2. SMTP
To configure SMTP server go to SETTING – Event – Event Server – Event Server (Pic.
11.1) and press the [Add] button to open the configuration window (Pic. 11.2). Then select SMTP
as a server type. This menu allows you to configure e-mail sending. You can attach an image, a
video record or a system log to an e-mail. You can specify a scheduled or alarm triggered sending
by e-mail.
The menu contains the following sections: “General”, “Server Setting”, “Media Setting”
(Pic. 11.8).