User manual

Chapter 11. The [SETTING] Menu: Event
N300 Operations User Manual
62
Protocol: displays the protocol of data transmission which defines a type of the vent server
(NAS, FTP, HTTP or SMTP).
Network Address: displays the IP address of the event server.
There are three buttons below the field:
[Add]: click this button to create a new event server. It calls a window for setting the event
server.
[Edit]: click this button to open a window for editing the selected event sever.
[Remove]: click this button to delete the selected event server.
Configuration window can include several setting groups according to the selected server
type. There are four event server types: FTP, SMTP, HTTP, Network Storage.
IMPORTANT:
The maximum number of the event servers is five. Moreover, there are some additional limitations which
will be described next.
11.1.1.1. FTP
To set the FTP server go to SETTING – Event – Event Server – Event Server (Pic. 11.1)
and press the [Add] button to open the configuration window (Pic. 11.2). In the [Server Type] field
choose [FTP]. The following settings groups will be available: “General”, “Server Setting”,
“Media Setting”.
Pic. 11.2