User manual

Chapter 9. The [SETTING] Menu: Live View
N300 Operations User Manual
49
Pic. 9.6
Audio mode: set the audio transmission mode.
 Full duplex: two-way audio channel.
 Half duplex: one-way audio channel.
 Talk Only: only audio transmission from the PC to the camera.
 Listen Only: only audio transmission from the camera to the PC.
Audio Input Gain: set the audio input gain: +12, +9, +6, +3, 0, -12, -9, -6, -3. Select [mute]
to turn the sound off.
Audio Encoding: allows you to identify audio encoding sound on the camera input:
 g.711_u-law: set the audio encoding according to the g.711 µ-law.
 g.711_a-law: set the audio encoding according to the g.711 α-law.
 AMR: set the audio encoding according to the current standard. Select this item and
you will see the [Bit Rate] field where you can choose one of the following values:
4.75, 5.15, 5.9, 6.7, 7.4, 7.95, 10.2, 12.2 kbps. The higher bitrate the better sound
quality.
Audio Output Gain: set the audio output gain: +12, +9, +6, +3, 0, -12, -9, -6, -3. Select
[mute] to turn the sound off.
9.3. Camera Setting
This menu allows you to adjust an image and includes two tabs: [Image Setting] and [View
Setting] (Pic. 9.7)