User manual

Chapter 7. The [SETTING] Menu: System
N300 Operations User Manual
29
Rule: you can choose the type of the IP filter – [Single], [Network], [Range].
The [Single] type allows you to specify only one IP address.
If you choose the [Network] type in addition to the [IP address] field the [CIDR Notation]
field will be available (Pic. 7.12). In this field you need to enter the value for Classless Inter-Domain
Routing (CIDR) (for details, please, see Appendix E. Glossary).
Pic. 7.12
Having chosen the [Range] type you can specify the range of IP addresses (Pic. 7.13).
Pic. 7.13
7.3.2. HTTPS
This section allows you to access the camera over HTTP (when the camera address
resembles the following: http://<IP>/) as well as over a secure connection (when the camera
address resembles the following: https://<IP>/) using port 443. Therefore, this connection type
provides better security. You can specify a connection type for a certain account, for example
provide an HTTP connection for a Viewer and an HTTPS connection for an Administrator.