Specifications

Chapter 6. Accessing the Camera over Internet
N300 Installation User Manual
45
For the next camera you can specify as follows: HTTP port 80, RTSP port 10001.
Now you need to configure your router to make the camera accessible over the Internet.
To do so, follow the steps below:
Step 1: enter the IP address of your router in the browser address field (here, the IP
address is 192.168.0.1). In the appeared window, enter your username and your password. After
successful authorization, the router settings page appears (Pic. 6.5).
Pic. 6.5
Step 2: click the [General Setup]. Click the [NAT] in the opened menu (Pic. 6.6).
Pic. 6.6
Step 3: in the opened menu, select the [Virtual server] (Pic. 6.7).