Specifications

Chapter 4. Installing the Camera and Cables’ Connecting
N300 Installation User Manual
13
Pic. 4.4
NOTE:
When using an external transponder, it is necessary to cut in a diode and a burden in-parallel to protect the
electronics of a camera from the voltage jumps during transients (Pic 4.3).
When using external sensors it is important to note that exceeding of the legitimate values of voltage/current
strength (5 V/100 mA) is prohibited because of the digital inputs/outputs are logic.
IMPORTANT!
It is not recommended to plug devices to the camera when it is switched on.