Instruction Manual

User Manual for WTFCS Freezers Beverage-Air
Rev. 02/23Beverage-Air10
0
o
F
USING THE UNIT
Operation is simple, just keep it connected to the correct
power supply and the freezer will maintain the internal
temperature it has been set to. Keep the drawers closed as
much as possible to avoid unnecessary run time.
The controller displays the current internal temperature.
Adjusting the set temperature lower will NOT cause the
system to lower the temperature faster. When on, the
refrigeration system is always operating at maximum.
For best results, make certain the unit remains powered
and has achieved the desired set point before loading it
with product. Pull down time will vary depending upon
the type of unit and ambient conditions
The temperature was set at the factory at 0
º
F, but you can
adjust it to your own selected temperature. 30 seconds
after adjustment, the display automatically
The internal fan will be on whenever the appliance is
connected to power.
Select
Defrost
Increase
Decrease
In most cases the only thing displayed will be the cabinet temperature. When something other than normal operation has
occurred, a message will be shown.
Message Displayed Why What to do
dEF
Unit is defrosting Nothing. Normal operation.
Hi
Cabinet temperature too warm Conrm doors or drawers are closed.
dOr
Door is open Close door, if message does not
change, call for service.
LEA
Compressor run time too long Check doors closed. If yes, call for
service.
E01, E02, E03, E04
Sensor unplugged or has failed Call for service.