RI specsheet
Item No.
Quantity
BOTTOM MOUNTED
REACH-IN & PASS-THRU
REFRIGERATORS
RI18 SERIES
MODELS:
RI18-HGS
RI18-HS-26
RID18-HGS
Commercial Refrigeration Equipment
General Specification
CABINET CONSTRUCTION
Heavy-duty construction includes stainless front (doors and
grilles). Exterior sides are stainless steel. Exterior top, back
and bottom are stainless steel. Cabinet includes interior
thermometer and interior fluorescent light.
Two shelves per door section standard.
Foamed-in-place CFC and HCFC-free polyurethane insula-
tion enhances the structural strength of the cabinet and
helps increase energy efficiency.
RI18-HGS model features (1) “half-size glass door” and (1)
“half-size solid door.” RI18-HS-26 model features (2) “half-
size doors”. RID18 Pass-Thru models feature (1) “half-size
glass door” and (1) “half-size solid door” per side. Doors
attach to cabinet on cam-lift hinges. Hinges permit doors to
stay open at 120° and gravity self-close. A plug-in type,
vinyl magnetic gasket is attached to each door. Three-inch
heavy-duty casters included, two with brakes standard.
REFRIGERATION
Balanced refrigeration system is located at bottom of cabi-
net. System uses R134a refrigerant, which is CFC and
HCFC-free for compliance with environmental safety con-
Available From:
RI18-HGS
*Note: Not all markings may apply to all model variations.
SPECIAL FEATURES
RI18-HGS model features (1) “half-size glass door” and
(1) “half-size solid door.”
RI18-HS-26 model features (2) “half-size doors.”
RID18 Pass-Thru models feature (1) “half-size glass
door” and (1) “half-size solid door” per side.
3” casters included, two with brakes standard.
3779 Champion Blvd., Winston-Salem, NC 27105
1-888-845-9800 Fax# 1-336-245-6453
http://www.Beverage-Air.com
3 Year Parts/Labor Warranty
Additional 2 Year Compressor Warranty