Installation manual

WARNING:
Be absolutely sure that the surrounding location has
been checked for the absence of explosive
concentrations before any electrical work is started.
Overcurrent Protection: 15 amps. (If fuses are used
use time delay type.)
CAUTION: TO PREVENT IGNITION OF
HAZARDOUS ATMOSPHERES, DISCONNECT THE
PRODUCT FROM THE SUPPLY CABINET CIRCUIT
BEFORE OPENING ELECTRICAL BOXES. KEEP
ASSEMBLY TIGHTLY CLOSED WHEN IN OPERATION.
The thermostat dial is calibrated in °F, but doesn’t
indicate temperatures inside the storage
compartment. Typical performance for thermostat
control settings are listed below.
Cabinet thermostats are factory preset for 20°F:
Thermostat Setting Cavity Temp.
+25°F +16°F
+10°F +4°F
88
BT30CWEXPR INFORMATION