Installation manual

PART INSTRUCTION MANUAL …………………………………3

PART INSTALLATION MANUAL ………………………………31

0 INFORMATION FOR THE READER ………………………………………………3

1 GENERAL INSTRUCTIONS ON DELIVERY ……………………………………3

• GENERAL INSTRUCTIONS ……………………………………………………………………3

• TECHNICAL DATA ………………………………………………………………………………3

• LIST OF REGULATION REFERENCES ……………………………………………………3

• GENERAL INSTRUCTIONS ……………………………………………………………………3

• SETTING UP ………………………………………………………………………………………4

• TESTING …………………………………………………………………………………………4

MACHINE LOADING …………………………………………………………………………………………………5

POSITION OF TRAYS ………………………………………………………………………………………………5

LENGTH ………………………………………………………………………………………………………………5

2 CONTROL PANEL …………………………………………………………………7

• DESCRIPTION OF CONTROLS ………………………………………………………………7

• CORE PROBE ……………………………………………………………………………………8

• GENERAL SETTING ……………………………………………………………………………8

LANGUAGE …………………………………………………………………………………………………………8

CLOCK ………………………………………………………………………………………………………………9

TEMPERATURE UNIT OF MEASUREMENT ……………………………………………………………………9

3 WORKING …………………………………………………………………………11

PRE-COOLING CYCLE ……………………………………………………………………………………………11

• QUICK COOLING CYCLE ……………………………………………………………………11

IFR POSITIVE QUICK COOLING CYCLE ………………………………………………………………………13

CORE PROBE POSITIVE QUICK COOLING CYCLE …………………………………………………………14

CORE PROBE NEGATIVE QUICK COOLING CYCLE ………………………………………………………15

TIME-CONTROLLED POSITIVE QUICK COOLING CYCLE …………………………………………………16

TIME-CONTROLLED NEGATIVE QUICK COOLING CYCLE …………………………………………………17

CORE PROBE HARD QUICK COOLING CYCLE ………………………………………………………………18

TIME-CONTROLLED HARD QUICK COOLING CYCLE ………………………………………………………19

• STORING CYCLE ………………………………………………………………………………21

POSITIVE STORING CYCLE ……………………………………………………………………………………21

NEGATIVE STORING CYCLE ……………………………………………………………………………………22

• MEMORIZING PROGRAMMES ………………………………………………………………23

• USING MEMORIZED PROGRAMMES ………………………………………………………23

• USING RECOMMENDED PROGRAMMES …………………………………………………24

• DEFROSTING …………………………………………………………………………………24

4 ACCESSORIES ……………………………………………………………………26

• PRINTING MEMORIZED CYCLES ……………………………………………………………26

5 MAINTENANCE ……………………………………………………………………27

• MAINTENANCE AND CLEANING ……………………………………………………………27

CLEANING THE CABINET …………………………………………………………………………………………27

CLEANING THE AIR CONDENSER ……………………………………………………………………………28

STAINLESS-STEEL MAINTENANCE ……………………………………………………………………………28

DISCONTINUED USE ………………………………………………………………………………………………29