Owners Manual

www.beverage-air.com
| 8
MAINTENANCE GUIDELINES CONT’D
CLEANING THE CONDENSER COIL
IMPORTANT WARRANTY INFORMATION:
Condensers accumulate dirt and require regular cleaning. Dirty condensers result in compressor
failure, product loss, and lost sales; which are not covered by warranty
If you keep the condenser(s) clean you will minimize your service expense and lower your electrical
costs. The following is a step-by-step guideline for the cleaning of the condenser(s):
1. Disconnect power to the unit.
2. Take off front lower grill assembly by removing the two (2) screws in the top corners.
3. Clean off accumulated dirt from the condenser coil(s) using a vacuum and/or a damp rag.
4. Replace the grill assembly.
5. Connect power to the unit and verify that when required the condensing unit(s) are running.
If you cannot remove the dirt adequately, please call your refrigeration service company.
CLEANING THE CONDENSATE DRAIN
IThe condensate drain and condensate drain line is located below the bottom shelf and must be
inspected to ensure it is free of debris. Pour a cup of water into each drain to ensure water flows
freely and does not over flow the condensate pan. Almost all water leak issues are a result of the
drain being clogged.
Cleaning and inspecting the condenser, drain and drain line is not covered under factory limited
warranty.