Use And Care Manual

better water industries, inc.
209 North Tyler Street • Tyler, Minnesota 56178
website: http://betterwaterind.com
STEP 2
Remove well cap or seal.
STEP 3
Use pipe to get by any
restriction in the well.
STEP 5
Pour determined amount of granules in 5 gallons of
water. Pour solution down the well to sanitize top of
well casing. Note: Too much chlorine is better than not
enough.
STEP 7
Let stand for at least 6 hours or overnight. Flush
off well with garden hose until all chlorine smell is
gone. Do the same with all faucets in the house.
STEP 8
Return all equipment to service position.
STEP 6
Use garden hose to circulate water
in the well for at least 15 minutes.
If chlorine smell is not strong,
repeat steps 4 & 5. Run water
through service line until you
detect chlorine odor in all taps.
STEP 4
Pour determined
amount of tablets
down pipe to sanitize
the bottom of the well.
STEP 1
Bypass water
treatment
equipment.
• Softeners
• Filters
• RO Systems, etc.
We Take Pride in Protecting Your Water!
APPROVED AND REGISTERED WITH:
When...
-Pump Repair or Replacement
-After any Water System Maintenance
-Biannual Well Inspection & Sanitization
Why...
-Kill Bacteria
-Prolong Pump Life
-Reduce Iron Bacteria Build-Up
Where...
-Down the Well
-Inside Storage Tank
-Throughout Plumbing
Watch the
Video
Well Safe
Well Sanitizer Kit