User guide
Installing the Injecon Fing, Acrylic Sleeve, and Check Valve 7
Installing the Injecon Fing, Acrylic Sleeve, and Check Valve
Reconnect the main CPAP hose to the top of the injecon ng.
Separate the face mask hose
from the main hose, and thread
the acrylic sleeve onto the end
of the main hose. Reaach your
face mask hose. When using the
SoClean unit,
Visit
for a video demonstraon of this procedure.
5. SoClean Check Valve
Your SoClean check valve assembly is
a series of two check valves separated
by a short length of clear tube. It is
installed along the length of hose that connects your SoClean to
your CPAP system. This assembly is important because it prevents
water from your humidier reservoir from backing up into your
SoClean machine. The clear tube allows you to visually inspect for
water trapped within it. If you can see water in the clear tube, the
check valve assembly should be replaced immediately.